DIN Rail LED-Dimmer
From InCircuit
This site is under construction. Some links may currently not work. If you have any questions about the content of this site, please send us an e-mail |
Hardware
DIN Rail LED-Dimmer - 8 Channel LED-Dimmer Module
Features:
- 8x LED dimmer output
- Intensity is variable in 12 steps or steplessly
- 8x Binary input for external switches
- 2x Relais output (COM, NO) switching power: 230V/5A
- 1x RS485 via BUS connector
- Numeric display for device address
- Arbitrary number of modules mountable side by side
- Easy connection of all modules with BUS connector
- All modules can communicate via RS485
- DIN-Rail enclosure: 6 pitch units (div)
- Other DIN-Rail modules available
- Input voltage: 24V DC
- Temperature range from -10°C to +70°C
Railbus Registers / Sub addresses
Communicating via the DIN Rail BUS Protocol, the DIN Rail LED-Dimmer is fully controlable through these registers:
Duty cycles:
SADR | 31 - 8 | 7 - 0 | Read | Write |
---|---|---|---|---|
0x11 | 0 | PWM Duty Cycle Channel 1 | X | X |
Downloads