BMS-Pin on ICnova SAM9G45 OEM
From InCircuit
To modify the BMS pin on the ICnova SAM9G45 OEM, a resistor has to be moved. Currently there are two hardware-revisions are available, each having another place for this resistor. To determine which description to follow, please search for the Number 625000112A in a corner of the module. If the module should boot from NOR-Flash (default configuration), R49 has to be placed. If SAM-BA is to be utilized, R48 should be placed. Only one resistor can be set at a time. Both resistors are 1kR. The correct place of the resistors can be seen in the following pictures.
625000112A is present | is not present |