Difference between revisions of "DIN Rail CPU 10"

From InCircuit
Jump to: navigation, search
Line 56: Line 56:
  
 
The '''[http://www.ic42.de/Linux-Images/icnova_20110104.iso Support-CD]''' contains all sources, incl. Linux 2.6.28, which are needed to build a toolchain and a working filesystem for the {{PAGENAME}}.
 
The '''[http://www.ic42.de/Linux-Images/icnova_20110104.iso Support-CD]''' contains all sources, incl. Linux 2.6.28, which are needed to build a toolchain and a working filesystem for the {{PAGENAME}}.
A Support-package containing all sources can be found under '''http://www.ic42.de/Linux-Images/20140210_buildroot.tar.bz2'''.
+
A Support-package containing all sources can be found under '''[http://www.ic42.de/Linux-Images/20140210_buildroot.tar.bz2]'''.
 
More information about the ICnova SAM9G45 OEM Module can be found on the [[:Category:ICnova SAM9G45|ICnova SAM9G45]] category.
 
More information about the ICnova SAM9G45 OEM Module can be found on the [[:Category:ICnova SAM9G45|ICnova SAM9G45]] category.
  

Revision as of 14:15, 10 February 2014

Template:Under construction

Contents

Hardware

DIN Rail CPU 10 - high performance ARM9 Embedded PC Module

DIN Rail CPU 10


The device DIN Rail CPU 10 is equipped with an ICnova SAM9G45 OEM module. It operates with an Atmel ARM9 AT91SAM9G45B core at 400MHz CPU clock.


Features:

  • ICnova SAM9G45 OEM Module with up to 400 MHz CPU clock
  • 128MB DDR2-RAM
  • 8MB NOR-Flash
  • 256MB NAND Flash
  • Internal µSD cardreader
  • 1x 10/100 Base-T-Ethernet-port
  • 2x UART for uplink and downlink
  • 2x RS485 interface
  • 5x User-LEDs
  • Arbitrary number of modules mountable side by side
  • Easy connection of all modules with BUS connector
  • All modules can communicate via UART and RS485
  • DIN-Rail enclosure: 1 pitch unit (div)
  • Other DIN-Rail modules available
  • Linux OS, toolchain and sources are included
  • Input voltage: 12V to 24V DC (24V recommended for use with other DIN Rail modules)
  • Power consumption:

- idle: 0,6W@24V DC

- busy: max. 1,5W@24V DC

  • Industrial tempearture range from -40°C to +85°C


How To

The access to the CPU10 can be done with an USB-UART-Bridge at UART3 (DEBUG-UART pin 16 and pin 18) and the following parameters:

 - Baudrate: 115200
 - Databits: 8
 - Stopbit: 1
 - Parity: none
 - Flow control: none

A new image can be loaded by SD-card or over Network. By default the Bootloader is configured to search for a SD-card. If a SD-card with a suitable Linux-Image was found, the system starts to boot from the SD-card. Otherwise the system starts from the internal flash memory.


Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.

The Support-CD contains all sources, incl. Linux 2.6.28, which are needed to build a toolchain and a working filesystem for the DIN Rail CPU 10. A Support-package containing all sources can be found under [1]. More information about the ICnova SAM9G45 OEM Module can be found on the ICnova SAM9G45 category.


Downloads

Datasheet DIN Rail CPU 10

Personal tools