Difference between revisions of "DW1000 USB-Stick"
From InCircuit
(→Downloads) |
(→Hardware) |
||
Line 15: | Line 15: | ||
*Dimensions (LxWxH): 73 x 25 x 11 mm | *Dimensions (LxWxH): 73 x 25 x 11 mm | ||
*Single buton to set [[radino32 DW1000]] / [[radinoL4 DW1000]] to bootloader mode | *Single buton to set [[radino32 DW1000]] / [[radinoL4 DW1000]] to bootloader mode | ||
+ | |||
+ | <br/> | ||
+ | |||
+ | ==Software== | ||
+ | |||
+ | The demo software for the DW1000 USB-Stick is a modified variant of the [[dw1000_ranging_demo|DW1000 rading demo]]. The DW1000 USB-Stick demo starts always as TAG and can be changed by a terminal program (9600 baud and 8N1) to an ANCHOR. | ||
<br/> | <br/> |
Revision as of 08:34, 25 July 2017
Hardware
The In-Circuit DW1000 USB-Stick combines a radino32 DW1000 or a radinoL4 DW1000 with an UWB antenna as an USB device.
Features:
- Arduino comtpatible
- USB-A plug
- Onboard UWB antenna
- User LED, RX/TX LEDs and Power LED
- Intput voltage: 5 VDC (USB)
- Onboard 3.3 V regulator
- Dimensions (LxWxH): 73 x 25 x 11 mm
- Single buton to set radino32 DW1000 / radinoL4 DW1000 to bootloader mode
Software
The demo software for the DW1000 USB-Stick is a modified variant of the DW1000 rading demo. The DW1000 USB-Stick demo starts always as TAG and can be changed by a terminal program (9600 baud and 8N1) to an ANCHOR.
Downloads
- Datasheet: Datasheet DW1000 USB-Stick
- Demo for DW1000 USB-Stick: Demo_DW1000_USB-Stick.zip
- Unzip and copy to your Arduino Sketchbook folder.
- Unzip and copy to your Arduino Sketchbook folder.