IC Case

Hardware

The IC Case is a universal storrage/transportation/charging device for the IC RTLS and distancing systems including HRP, HRPpro, ICDW and ICTRAC. The IC Case is highly customizable. It provides universal Slots to mount adapters to hold different Hardware. The IC Case has a built in power supply. It can be connected to a mains outlet and is capable of charging all connected devices at once.
The IC Case comes in different sizes an capacities.

Device	Pictures	Description
IC Case32		up to 32 charging sockets for IC quad tags or up to 16 holding brackets for CI Anchors PoE Input voltage: 85-264 VAC, 47-63Hz Input current (max.): 1.1A@115VAC/0.55A@230VAC Power cable: 1.5m with CEE7/7 plug combined charging current up to 20A @5V Over current protection for each charging socket Size: 420x325x180mm Weight: ~6kg (depending on equipment)
Device	Pictures	Description
IC Case105		up to 105 charging sockets for IC quad tags Input voltage: 88-264 VAC, 47-63Hz Input current (max.): 2A@115VAC/1.1A@230VAC Power cable: 1.5m with CEE7/7 plug combined charging current up to 40A @5V Over current protection for each charging socket Size: 510x420x150mm Weight: ~7kg (depending on equipment)

Accessories

The IC Case is highly customizable. It can be equipped with any of the accessories below.

Accessory	Pictures	Description
IC miniTag socket		This socket holds and recharges Tags in the miniTag form factor. (Recharging is only possible, if the IC case is connected to mains power) A miniTag socket occupies one slot of the IC Case.
IC quad socket		This socket holds and recharges Tags in the quad form factor. (Recharging is only possible, if the IC case is connected to mains power) A quad socket occupies one slot of the IC Case.
IC Anchor socket		This socket holds Anchors in the IC Anchor form factor. An Anchor socket occupies two slots of the IC Case.

Downloads

Datasheet IC Case