Difference between revisions of "ICnova A20 SODIMM"

From InCircuit
Jump to: navigation, search
(Suitable application development boards)
(Software)
Line 34: Line 34:
  
 
== Software ==
 
== Software ==
{{software|u-boot}}
+
{{Software|u-boot}}
 
+
  
 
== Downloads ==
 
== Downloads ==

Revision as of 14:17, 14 October 2014

Template:Under construction

Contents

Hardware

ICnova A20 SODIMM - high performance dual CORTEX-A7 SODIMM-200 module

ICnova A20 SODIMM


The device ICnova A20 SODIMM is equipped with an Atmel ARM CORTEX MPU. It operates with an ARM dual CORTEX-A7 core with 1GHz CPU clock.


Features:

  • Atmel ARM dual Cortex-A7 processor with 1GHz CPU clock
  • up to 2GB DDR3-RAM
  • 4GB NAND-Flash
  • one integrated 10/100 MBit Ethernet PHY
  • power management unit
  • all peripherals are accessible on connectors
  • easy to use SODIMM-200 module (1.8V or 2.5V Version)
  • tempearture range from -10°C to +70°C



Suitable application development boards

Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.

If you are new to kernel building please refer to First Steps with Buildroot.

The Board support packages listed in table above contain all sources required to build the linux image for the different combinations with the ICnova A20 SODIMM.
If an older version of the BSP is needed please look at our Downloads section.

Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none is found.

On the ICnova A20 SODIMM the bootloader u-boot is preinstalled on the on-board flash.

Downloads

Datasheet ICnova A20 SODIMM

Personal tools