Difference between revisions of "ICnova A20 SODIMM"

From InCircuit
Jump to: navigation, search
Line 21: Line 21:
 
*all peripherals are accessible on connectors
 
*all peripherals are accessible on connectors
 
*easy to use SODIMM-200 module (1.8V or 2.5V Version)
 
*easy to use SODIMM-200 module (1.8V or 2.5V Version)
*'''tempearture range from -10°C to +70°C'''
+
*'''temperature range from -10°C to +70°C'''
  
  

Revision as of 14:27, 20 October 2014

Template:Under construction

Contents

Hardware

ICnova A20 SODIMM - high performance dual CORTEX-A7 SODIMM-200 module

ICnova A20 SODIMM


The device ICnova A20 SODIMM is equipped with an Atmel ARM CORTEX MPU. It operates with an ARM dual CORTEX-A7 core with 1GHz CPU clock.


Features:

  • Atmel ARM dual Cortex-A7 processor with 1GHz CPU clock
  • up to 2GB DDR3-RAM
  • 4GB NAND-Flash
  • one integrated 10/100 MBit Ethernet PHY
  • power management unit
  • all peripherals are accessible on connectors
  • easy to use SODIMM-200 module (1.8V or 2.5V Version)
  • temperature range from -10°C to +70°C



Suitable application development boards

In-Circuit offers a wide range of Application Development Boards that can be used to develop your products and solutions while reducing your development time.

These evaluation boards help you to evaluate the features and performance of selected products and system solutions. Our evaluation boards demonstrate optimized and tested solutions for your application design. These boards are designed mainly for your evaluation, design and testing purposes.

Basically all our ADBs feature: Ethernet, USB-Host, USB_Device, SDC
Exceptions to this are listed in the Notes column of the following table.

The table below shows the suitable Application Development Boards (ADB) for the ICnova A20 SODIMM.

ADB Picture Supply voltage Main features Notes
ICnova ADB4006
ICnova ADB4006.jpg
5V DC HDMI connector, Ethernet, SATA interface, Analog audio input/output


Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.

If you are new to kernel building please refer to First Steps with Buildroot.

The board support package contains all sources required to build the linux image for the ICnova A20 SODIMM on the ICnova ADB1000.
The most recent version is listed at the bottom of this page. Other versions can be found on the Downloads page.

Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none is found.

On the ICnova A20 SODIMM the bootloader u-boot is preinstalled on the on-board flash.


Downloads

Datasheet ICnova A20 SODIMM

Personal tools