ICnova ADB1002

From InCircuit
Jump to: navigation, search
This product is End of Life
This product is End of Life

Contents

Hardware

The ICnova ADB1002 is an evaluation board which is ideal to develop network applications. It works with all ICnova OEM Modules.

ICnova ADB1002

It is ideal for developing:

  • Radio sniffer applications
  • Home automation
  • embedded Linux Board with DVI-Interface
  • Wireless Gateway


The ICnova ADB1002 has the following features:

  • 1x Socket for ICnova OEM Modules
  • 1x Socket for ICradio OEM Modules
  • 1x DVI–Interface for direct monitor support
  • 1x 10/100MBit Ethernet (MII)
  • 1x USB 2.0 High Speed Host (480 MBit)
  • 1x USB 2.0 High Speed Device (480 MBit)
  • 1x UART on Pinheader
  • 1x JTAG for ICnova OEM
  • 1x JTAG for Radio OEM
  • 2x µSD card holder with MMI and SPI interface
  • 1x Real-Time-Clock buffered with Li-Ion battery
  • 1x I²C (TWI)on Pinheader
  • Dimensions: 100mm x 120mm
  • Power Supply from USB-Device Port or 5VDC Supply over Power Jack
  • Power consumption about 1.5W

Suitable modules

In order to utilize the interfaces of the ADBs a CPU module has to be mounted.

The following table lists modules compatible with the ICnova ADB1002.

Module Picture Description Main features Notes
ICnova SAM9G45 OEM
Icnova sam9g45 oem.jpg
Atmel ARM9 AT91SAM9G45B, 400MHz
ICnova i.MX353 OEM
ICnova i.MX353 OEM.jpeg
Freescale i.MX353 ARM11, 533MHz

Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.

If you are new to kernel building please refer to First Steps with Buildroot.

The board support packages for the modules on the ICnova ADB1002 can be found on the modules page.

Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none are found.


Downloads

Datasheet ICnova ADB1002

Schematic ICnova ADB1002

Personal tools