The ICnova ADB1004 is a ready to go touch display solution with ADB1004, 5inch display and ICnova SAM9G45 OEM. Just connect to power (e.g. USB) and see the Linux booting up in display! It works with ICnova AP7000 OEM, ICnova AP7000 OEMplus, ICnova i.MX353 OEM and ICnova SAM9G45 OEM.
The ICnova ADB1004 is designed for:
- Touch Terminals
- Home automation
- digital photo frame
The ICnova ADB1004 has the following features:
- 1xHigh-Speed-USB 2.0 Host port
- 1xHigh-Speed-USB 2.0 Device Port
- 1xTFT-Touchscreen display
- PWM controller for TFT brightness
- 1xSD/MMC card holder with MMI interface
- UART, RS485, SPI Interfaces
- Real-Time-Clock buffered
- 1xI²C interface
- 1xJTAG-interface (compatible with JTAGICE-mkII)
- 1x Socket for ICradio OEM Modules
The ICnova ADB1004 can be ordered at our Shop.
In order to utilize the interfaces of the ADBs a CPU module has to be mounted.
The following table lists modules compatible with the ICnova ADB1004.
|ICnova SAM9G45 OEM||Atmel ARM9 AT91SAM9G45B, 400MHz
|ICnova i.MX353 OEM||Freescale i.MX353 ARM11, 533MHz
All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.
If you are new to kernel building please refer to First Steps with Buildroot.
The board support packages for the modules on the ICnova ADB1004 can be found on the modules page.
Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none are found.