ICnova ADB1004

From InCircuit
Jump to: navigation, search

Contents

Hardware

ICnova ADB1004
ICnova ADB1004


The ICnova ADB1004 is a ready to go touch display solution with ADB1004, 5inch display and ICnova SAM9G45 OEM. Just connect to power (e.g. USB) and see the Linux booting up in display! It works with ICnova AP7000 OEM, ICnova AP7000 OEMplus, ICnova i.MX353 OEM and ICnova SAM9G45 OEM.


The ICnova ADB1004 is designed for:

  • Touch Terminals
  • Home automation
  • digital photo frame


The ICnova ADB1004 has the following features:

  • 1xHigh-Speed-USB 2.0 Host port
  • 1xHigh-Speed-USB 2.0 Device Port
  • 1xTFT-Touchscreen display
  • PWM controller for TFT brightness
  • 1xSD/MMC card holder with MMI interface
  • UART, RS485, SPI Interfaces
  • Real-Time-Clock buffered
  • 1xI²C interface
  • 1xJTAG-interface (compatible with JTAGICE-mkII)
  • 1x Socket for ICradio OEM Modules


The ICnova ADB1004 can be ordered at our Shop.

Suitable modules

In order to utilize the interfaces of the ADBs a CPU module has to be mounted.

The following table lists modules compatible with the ICnova ADB1004.

Module Picture Description Main features Notes
ICnova SAM9G45 OEM
Icnova sam9g45 oem.jpg
Atmel ARM9 AT91SAM9G45B, 400MHz
ICnova i.MX353 OEM
ICnova i.MX353 OEM.jpeg
Freescale i.MX353 ARM11, 533MHz

Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.

If you are new to kernel building please refer to First Steps with Buildroot.

The board support packages for the modules on the ICnova ADB1004 can be found on the modules page.

Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none are found.


Downloads

Datasheet ICnova ADB1004 (german)

Schematic ICnova ADB1004

assembly drawing ICnova ADB1004

Personal tools