ICnova ADB4006

From InCircuit
Revision as of 14:56, 6 October 2014 by RSchmidt (Talk | contribs)

Jump to: navigation, search

Template:Under construction

Contents

Hardware

ICnova ADB4006

The ICnova ADB4006 is a ready to go solution with HDMI connector and ICnova A20 SODIMM. Just connect to power + monitor and see the Linux booting up in display!


The ICnova ADB4006 is designed for:

  • Smart Home Applications
  • Data logger for Solar applications
  • Industrial control devices


The ICnova ADB4006 has the following features:

  • 1x 10/100 Base-T-Ethernet-Port
  • 2x High-Speed-USB 2.0 Host-Port
  • 1x SATA connector
  • 1x HDMI connector
  • 1x SD/MMC card holder with MMI interface
  • 1x DBG UART
  • 2x LVDS interface
  • 2x GPIO pinheader
  • 1x JTAG interface
  • Dimensions: 122mm x 71.5mm
  • Temperature range from -40°C to +85°C
  • Input voltage: 5V DC


The ICnova ADB4006 and appropriate ICnova CPU-Modules can be ordered at our Shop


Suitable CPU Modules

Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.

If you are new to kernel building please refer to First Steps with Buildroot.

The Board support packages listed in table above contain all sources required to build the linux image for the different combinations with the ICnova ADB4006.
If an older version of the BSP is needed please look at our Downloads section.

Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none is found.


Downloads

Datasheet ICnova ADB4006

Schematic ICnova ADB4006

Personal tools