ICnova AP7000 OEMplus

From InCircuit
Revision as of 10:06, 5 April 2013 by Raik (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Hardware

ICnova AP7000 OEMplus - with USB 2.0 high speed host


The ICnova AP7000 OEMplus is the smallest AVR32 AP7000 based linux board with an USB host interface.

A missing USB-Host on the AT32AP7000 is no hassle any more and hooking up an external hard drive or an optical drive is easily done.

This module is equipped with a huge amount of memory to realise even complex applications without memory extension.

It has 256MB NAND Flash, 64MB Mobile SD-RAM and 1MB NOR-Flash for the bootloader. The SD-RAM is connected with a 32bit wide bus to use the full performance of the AT32AP7000.

The board is ready to go and needs only a single 3.3V power supply. All Linux sources are open source and can be ordered on a CD.

By using the ICnova AP7000 OEMplus module there is no need to develop a multilayer pcb for external components. The board can be snapped easily into the matching sockets.

A free Eagle Library is in the download section available.



The ICnova AP7000 OEMplus has the following features:


  • AT32AP7000 processor with up to 210DMPIS at 140MHz clock
  • 64MB SDRAM
  • 8MB NOR-Flash, 16 bit wide
  • 256MB NAND
  • internal Vreg, VIN=3.3V
  • all peripherals available at connectors
  • very small footprint 40mm x 35mm
  • long term availability (>5 years)


Software

Retrieved from "https://wiki.in-circuit.de/index.php5?title=ICnova_AP7000_OEMplus&oldid=495"
Personal tools