ICnova SAM9G45 OEM

From InCircuit
Revision as of 14:19, 15 April 2013 by Raik (Talk | contribs)

Jump to: navigation, search

Hardware

ICnova SAM9G45 OEM - ultra small size meets highest performance

ICnova SAM9G45 OEM


The device ICnova SAM9G45 OEM is equipped with an Atmel AT91SAM9G45 MCU or its sister MCU Atmel AT91SAM9M10. It operates with an ARM926EJS core at 400MHz CPU clock.


Features:

  • Atmel ARM9 AT91SAM9G45B processor with up to 400 MHz CPU clock
  • 128MB DDR2-RAM
  • 1MB NOR-Flash
  • 256MB NAND Flash
  • 1xHigh speed (480MBit) USB Host
  • 1xHigh speed (480MBit) USB Device (configurable by software as 2nd Host)
  • voltage regulators for 3.3V and 1.8V core voltage
  • all peripherals are accessible on connectors
  • extreme compact design with 40x35mm overall size


Compatible evaluation boards

In-Circuit offers a wide range of evaluation boards that can be used to develop your products and solutions while reducing your development time. These evaluation boards help you to evaluate the features and performance of selected products and system solutions. Our evaluation boards demonstrate optimized and tested solutions for your application design. These boards are designed mainly for your evaluation, design and testing purposes.

The table below shows the suitable Application Development Boards (ADB) for the ICnova SAM9G45 OEM.


Evaluation board Main features
ADB1000 1x 10/100 Base-T-Ethernet-Port; 3x High-Speed-USB 2.0 ports (only with an ICnova OEMplus module); 1x USB-Device Port; connector for a TFT-Touchscreen display; 4 USART interfaces; 1x SD/MMC card reader; 2x RS485 Interfaces; Real-Time-Clock buffered with Li-Ion battery
ADB1002 1x 10/100 Base-T-Ethernet-Port; 1x High-Speed-USB 2.0 Host port; 1x USB-Device Port; 1x DVI output for direct monitor support; 2x µSD card reader; 1x Real-Time-Clock buffered with Li-Ion battery; 1x JTAG-interface (compatible with JTAGICE-mkII)
ADB1003 1x 10/100 Base-T-Ethernet-Port; 1x JTAG-interface; I/O Extender Board for all ICnova OEM Modules; all free pins of the OEM-Modules are routed to additional pin-headers
ADB3000 1x 10/100 Base-T-Ethernet-Port; 1x High-Speed-USB 2.0 Host port; 1x USB-Device Port; connector for a TFT-Touchscreen display; 1x µSD card reader; USART, SPI, I2C Interfaces; 1x µSD card reader


Software

The Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box. For some configuration a suitable Android-Image is provided, too.

Personal tools