ICnova SAMA5D36 SODIMM

From InCircuit
Jump to: navigation, search
This product is End of Life
This product is End of Life

Contents

Hardware

ICnova SAMA5D36 SODIMM - high performance CORTEX-A5 SODIMM-200 module

ICnova SAMA5D36 SODIMM


The device ICnova SAMA5D36 SODIMM is equipped with an Atmel ARM CORTEX MPU. It operates with an ARM CORTEX-A5 core at 536 MHz CPU clock.


Features:

  • Atmel ARM Cortex-A5 processor with up to 536 MHz CPU clock
  • up to 512MB DDR2-RAM
  • 8MB NOR-Flash
  • up to 2GB NAND-Flash
  • two integrated 10/100 MBit Ethernet PHY's
  • voltage regulators for 3.3V, 1.8V and 1.2V core voltage
  • all peripherals are accessible on connectors
  • easy to use SODIMM-200 module (1.8V-Version)
  • temperature range from -40°C to +85°C


Suitable application development boards

In-Circuit offers a wide range of Application Development Boards that can be used to develop your products and solutions while reducing your development time.

These evaluation boards help you to evaluate the features and performance of selected products and system solutions. Our evaluation boards demonstrate optimized and tested solutions for your application design. These boards are designed mainly for your evaluation, design and testing purposes.

Basically all our ADBs feature: Ethernet, USB-Host, USB_Device, SDC
Exceptions to this are listed in the Notes column of the following table.

The table below shows the suitable Application Development Boards (ADB) for the ICnova SAMA5D36 SODIMM.

ADB Picture Supply voltage Main features Notes
ICnova ADB4003
ICnova ADB4003.jpeg
12-24V DC 2x Ethernet, TFT-Touchscreen connector, 2x RS485, RS422, RS232, CAN, I2C, RTC, Buzzer, GPIO pin headers

Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.

If you are new to kernel building please refer to First Steps with Buildroot.

The board support package contains all sources required to build the linux image for the ICnova SAMA5D36 SODIMM on the main ADB.
The most recent version is listed at the bottom of this page. Other versions can be found on the Downloads page.

Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none is found.

On the ICnova SAMA5D36 SODIMM the bootloader u-boot is preinstalled on the on-board flash.


Downloads

Most recent board support package

Datasheet ICnova SAMA5D36 SODIMM

Personal tools