Difference between revisions of "ICnova i.MX353 OEM"

From InCircuit
Jump to: navigation, search
Line 69: Line 69:
 
==Downloads ==
 
==Downloads ==
  
[[Datasheet]]
+
[[Media:Datasheet_ICnova_iM353_OEM-en.pdf|Datasheet ICnova i.MX353 OEM]]
  
 
[[Footprint]]
 
[[Footprint]]

Revision as of 09:48, 19 April 2013

Contents

Hardware

ICnova i.MX353 OEM - Freescale ARM11 i.MX353

ICnova i.MX353 OEM


This board is ready to go and needs only a single power supply voltage of 3.3V to 5V. All Linux sources are open source and can be downloaded or ordered on a CD.

By using the ICnova iMX353 OEM module there is no need to develop a multilayer pcb for external components. The module can be snapped easily into the matching sockets.

An Eagle Library is available in the download section.


Features:


  • Freescale i.MX353 ARM11 processor with up to 533 MHz
  • 256MByte DDR2-RAM 32Bit wide!
  • 8MByte NOR-Flash
  • 256MByte NAND Flash
  • 1xHigh speed (480MBit) USB Host
  • 1xHigh speed (480MBit) USB Device
  • high efficiency voltage regulators for 3.3V, 2.5V DDR2 and 1.8V core voltage
  • all peripherals are accessible on connectors
  • extreme compact design with 40x35mm overall size
  • >5 years available



Compatible evaluation boards

In-Circuit offers a wide range of evaluation boards that can be used to develop your products and solutions while reducing your development time. These evaluation boards help you to evaluate the features and performance of selected products and system solutions. Our evaluation boards demonstrate optimized and tested solutions for your application design. These boards are designed mainly for your evaluation, design and testing purposes.

The table below shows the suitable Application Development Boards (ADB) for the ICnova iMX353 OEM.


Evaluation board Main features
ADB1000 1x 10/100 Base-T-Ethernet-Port; 3x High-Speed-USB 2.0 ports (only with an ICnova OEMplus module); 1x USB-Device Port; connector for a TFT-Touchscreen display; 4 USART interfaces; 1x SD/MMC card reader; 2x RS485 Interfaces; Real-Time-Clock buffered with Li-Ion battery
ADB1002 1x 10/100 Base-T-Ethernet-Port; 1x High-Speed-USB 2.0 Host port; 1x USB-Device Port; 1x DVI output for direct monitor support; 2x µSD card reader; 1x Real-Time-Clock buffered with Li-Ion battery; 1x JTAG-interface (compatible with JTAGICE-mkII)
ADB1003 1x 10/100 MBit Ethernet; 1x JTAG-interface; I/O Extender Board for all ICnova OEM Modules; all free pins of the OEM-Modules are routed to additional pin-headers
ADB1004 1x High-Speed-USB 2.0 Host port; 1x USB-Device Port; RS485, USART, SPI Interfaces; 1x µSD card reader; Real-Time-Clock buffered


Software

Downloads

Datasheet ICnova i.MX353 OEM

Footprint

Personal tools