ICnova i.MX353 OEM

From InCircuit
Revision as of 12:49, 13 May 2013 by Raik (Talk | contribs)

Jump to: navigation, search

Template:Under construction


Contents

Hardware

ICnova i.MX353 OEM - Freescale ARM11 i.MX353

ICnova i.MX353 OEM

This board is ready to go and needs only a single power supply voltage of 3.3V to 5V. All Linux sources are open source and can be downloaded or ordered on a CD.

By using the ICnova iMX353 OEM module there is no need to develop a multilayer pcb for external components. The module can be snapped easily into the matching sockets.

The uboot+ Linux kernel is preinstalled on the on-board NOR-flash. A free Eagle Library is available in the downloads section.


Features:

  • Freescale i.MX353 ARM11 processor with up to 533 MHz
  • 256MByte DDR2-RAM 32Bit wide!
  • 8MByte NOR-Flash
  • 256MByte NAND Flash
  • 1xHigh speed (480MBit) USB Host
  • 1xHigh speed (480MBit) USB Device
  • high efficiency voltage regulators for 3.3V, 2.5V DDR2 and 1.8V core voltage
  • all peripherals are accessible on connectors
  • extreme compact design with 40x35mm overall size
  • >5 years available


The ICnova i.MX353 OEM can be ordered at our Shop. Different Starter kits with appropriate Application Development Boards and Touchscreens are also available in the Shop



Compatible evaluation boards

In-Circuit offers a wide range of evaluation boards that can be used to develop your products and solutions while reducing your development time. These evaluation boards help you to evaluate the features and performance of selected products and system solutions. Our evaluation boards demonstrate optimized and tested solutions for your application design. These boards are designed mainly for your evaluation, design and testing purposes.

The table below shows the suitable Application Development Boards (ADB) for the ICnova i.MX353 OEM.


Evaluation board Main features
ADB1000 1x 10/100 Base-T-Ethernet-Port; 3x High-Speed-USB 2.0 ports (only with an ICnova OEMplus module); 1x USB-Device Port; connector for a TFT-Touchscreen display; 4 USART interfaces; 1x SD/MMC card reader; 2x RS485 Interfaces; Real-Time-Clock buffered with Li-Ion battery
ADB1002 1x 10/100 Base-T-Ethernet-Port; 1x High-Speed-USB 2.0 Host port; 1x USB-Device Port; 1x DVI output for direct monitor support; 2x µSD card reader; 1x Real-Time-Clock buffered with Li-Ion battery; 1x JTAG-interface (compatible with JTAGICE-mkII)
ADB1003 1x 10/100 MBit Ethernet; 1x JTAG-interface; I/O Extender Board for all ICnova OEM Modules; all free pins of the OEM-Modules are routed to additional pin-headers
ADB1004 1x High-Speed-USB 2.0 Host port; 1x USB-Device Port; RS485, USART, SPI Interfaces; 1x µSD card reader; Real-Time-Clock buffered


Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box. For some configuration a suitable Android-Image is provided, too.

The Support-CD contains all sources, incl. Linux Kernel 3.5.3, which are needed to build a toolchain and a working filesystem for the ICnova i.MX353 OEM.

After copying all folders into a folder on your local harddrive, do "make icnova_mx35_adb1000_defconfig && make" in this folder to build the toolchain.

This stripped-down archive contains the buildroot-sources only. All additional files will be downloaded during the build-process.


Downloads

Datasheet ICnova i.MX353 OEM

Footprint ICnova i.MX353 OEM

Gerber Footprint ICnova i.MX353 OEM

Eagle Library ICnova i.MX353 OEM

Pinning ICnova i.MX353 OEM

Personal tools