ICnova i.MX353 OEM

Hardware

ICnova i.MX353 OEM - Freescale ARM11 i.MX353

ICnova i.MX353 OEM

This board is ready to go and needs only a single power supply voltage of 3.3V to 5V.
For proper operation the Vin rise time to 3,3V should not exceed 100ms.

All Linux sources are open source and can be downloaded or ordered on a CD.

By using the ICnova iMX353 OEM module there is no need to develop a multilayer pcb for external components. The module can be snapped easily into the matching sockets.

The uboot+ Linux kernel is preinstalled on the on-board NOR-flash. A free Eagle Library is available in the downloads section.

Features:

Freescale i.MX353 ARM11 processor with up to 533 MHz
256MByte DDR2-RAM 32Bit wide!
8MByte NOR-Flash
256MByte NAND Flash
1xHigh speed (480MBit) USB Host
1xHigh speed (480MBit) USB Device
high efficiency voltage regulators for 3.3V, 2.5V DDR2 and 1.8V core voltage
all peripherals are accessible on connectors
extreme compact design with 40x35mm overall size
>5 years available

The ICnova i.MX353 OEM can be ordered at our Shop. Different Starter kits with appropriate Application Development Boards and Touchscreens are also available in the Shop

Suitable application development boards

Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.

If you are new to kernel building please refer to First Steps with Buildroot.

The Board support packages listed in table above contain all sources required to build the linux image for the different combinations with the ICnova i.MX353 OEM.
If an older version of the BSP is needed please look at our Downloads section.

Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none is found.

On the ICnova i.MX353 OEM the bootloader u-boot is preinstalled on the on-board flash.