Difference between revisions of "Interface Modules"

From InCircuit
Jump to: navigation, search
(USB-A UART Bridge CP2102)
(USB-B UART Bridge CP2102)
Line 48: Line 48:
 
<div class="tright" style="clear:none">[[File:USB-B UART Bridge.jpeg |200px | thumb | right | USB-B UART Bridge CP2102 | link=http://shop.in-circuit.de/product_info.php?cPath=38&products_id=80]]</div>
 
<div class="tright" style="clear:none">[[File:USB-B UART Bridge.jpeg |200px | thumb | right | USB-B UART Bridge CP2102 | link=http://shop.in-circuit.de/product_info.php?cPath=38&products_id=80]]</div>
  
 +
The USB-UART-Bridge connects UART components with an USB-Host. The Bridge generates a 3.3V Voltage from USB ( maximum 100mA@3.3V).
 +
 +
'''Features:'''
 +
*Baud rate: 300Bit/sec up to 1MBit/sec
 +
*Voltage-regulator: up to 100mA@3.3V
 +
*LEDs: RX and TX
 +
*IO: RX ( to connect with RX on the µC), TX (to connect with TX on the µC)
 +
*all Handshake signals are available on pin headers
 +
 +
 +
<br/>
 
Downloads:<br/>
 
Downloads:<br/>
 
*Driver: CP2102 [http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx CP201x Driver]<br/>
 
*Driver: CP2102 [http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx CP201x Driver]<br/>

Revision as of 12:36, 9 February 2017

Template:Under construction

Contents

USB-A UART Bridge CP2104

USB-A UART Bridge CP2104

The USB-UART-Bridge connects UART components with an USB-Host. The Bridge generates a 3.45V Voltage from USB. This can be used to supply the microcontroller over a jumper (maximum 100mA@3.45V).

Features:

  • Baud rate: 300Bit/sec up to 2MBit/sec
  • GPIOs 0-3 are set to push/pull at delivery state! (so LEDs, TxEN and GPIO are working)
  • Voltage-regulator: up to 100mA@3.45V
  • LEDs: Power, RX and TX
  • IO: RX ( to connect with RX on the µC),TX (to connect with TX on the µC), GND, VCC
  • Size: (LxWxH)(mm): 52.0 x 17.0 x 5.2


Downloads:

The USB-A UART Bridge CP2104 can be ordered at our Shop

USB-A UART Bridge CP2102

USB-A UART Bridge CP2102

The USB-UART-Bridge connects UART components with an USB-Host. The Bridge generates a 3.3V Voltage from USB. This can be used to supply the microcontroller over a jumper (maximum 100mA@3.3V).

Features:

  • Baud rate: 300Bit/sec up to 1MBit/sec
  • Voltage-regulator: up to 100mA@3.3V
  • LEDs: Power, RX and TX
  • IO: RX ( to connect with RX on the µC),TX (to connect with TX on the µC), GND, VCC
  • Size: (LxWxH)(mm): 45.0 x 15.0 x 5.2


Downloads:

The USB-A UART Bridge CP2102 can be ordered at our Shop

USB-B UART Bridge CP2102

USB-B UART Bridge CP2102

The USB-UART-Bridge connects UART components with an USB-Host. The Bridge generates a 3.3V Voltage from USB ( maximum 100mA@3.3V).

Features:

  • Baud rate: 300Bit/sec up to 1MBit/sec
  • Voltage-regulator: up to 100mA@3.3V
  • LEDs: RX and TX
  • IO: RX ( to connect with RX on the µC), TX (to connect with TX on the µC)
  • all Handshake signals are available on pin headers



Downloads:

The USB-B UART Bridge CP2102 can be ordered at our Shop

USB-RS485-Bridge

USB-RS485-Bridge

Downloads:

The USB RS485 Bridge can be ordered at our Shop

Personal tools