Microcontroller Modules

From InCircuit
Revision as of 12:08, 3 April 2017 by CGruenig (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

ICswift SAM7X128/256/512

ICswift SAM7X128/256/512

As this product isn't developed further, no additional support can be given.

To develop custom applications on ICswift SAM7, the Tools shipped by the WinARM project can be used. To program the application ATMEL's SAM-BA Tools can be used.

OpenOCD:

The AT91SAM9X128, AT91SAM9X256 or AT91SAM9X512 equipped on the corresponding ICswift SAM7X128 / SAM7X256 / SAM7X512 can be debugged either using the Sam-Ba interface or using the JTAG-connector. While the further is possible only, if the flash is empty, the latter can be used to debug and program any application.

To use the JTAG-Interface any supported Adapter can be used. Using the configuration-file found at ICswift-openocd.cfg, the device can be connected running

openocd -f icswift-openocd.cfg


Downloads:

The ICswift SAM7X128/256/512 can be ordered at our Shop



Micro32u4 Evalboard

Micro32u4 Evalboard

The Arduino Micro is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ISP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

Features:

  • Microcontroller: ATmega32u4
  • Operating Voltage: 5V
  • Operation from USB or Vin-Pin
  • Input Voltage (recommended): 7-15V
  • Digital I/O Pins: 20
  • PWM Channels: 7
  • Analog Input Channels: 12
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 100 mA
  • Flash Memory: 32 KB (ATmega32u4) of which 4 KB used by bootloader
  • SRAM: 2.5 KB (ATmega32u4)
  • EEPROM: 1 KB (ATmega32u4)
  • Clock Speed: 16 MHz


Downloads:

The Micro32u4 Evalboard can be ordered at our Shop



DIL-AT90USB162

DIL-AT90USB162

AT90USB162 controller module


Features:

  • Controller: AT90USB162
  • Button for start programming via FLIP-bootloader


Downloads:

The DIL-AT90USB162 can be ordered at our Shop



DIL-AT90USB646

DIL-AT90USB646

AT90USB646 controller module

Features:

  • Controller: AT90USB646
  • Button for start programming via FLIP-bootloader


Downloads:

The DIL-AT90USB646 can be ordered at our Shop



DIL-AT90USB1287

DIL-AT90USB1287

AT90USB1287 controller module


Features:

  • Controller: AT90USB1287
  • The 1287 has an USB Full Speed OTG Device, so it can be used as USB-Host!
  • Button for start programming via FLIP-bootloader


Downloads:

The DIL-AT90USB1287 can be ordered at our Shop



DIL-CY8C3666AXI-052

DIL-CY8C3666AXI-052

DIL-CY8C3666AXI-052 controller module


Features:

  • Controller: CY8C3666AXI-052
  • 10-pin SWD programming connector for Cypress MiniProg3 Programmer


Downloads:

The DIL-CY8C3666AXI-052 can be ordered at our Shop

Atmel UC3A Evaluation board

Atmel UC3A Evaluation board

The UC3A is a high performance, low power AVR®32 UC 32-Bit microcontroller.

The UC3A eval board is a simple pcb designed to be integrated in excisting designs or to be mounted on a breadboard. All IO-pins are accessible on pinheads and the JTAG connector allows in-circuit debugging.


Features:

  • UC3A is a high performance, low power AVR®32 UC 32-Bit microcontroller
  • AT32UC3A1512-AUT
  • User button
  • 4 user leds
  • USB connector Type B
  • JTAG interface
  • a 32.768kHz and 12MHz crystal are mounted


Downloads:

The Atmel UC3A Evaluation board can be ordered at our Shop



ATxmega128A1U Centipede

ATxmega128A1U Centipede

The ATxmega128A1U Centipede is a breakout board with Atmel's ATxmega128A1U-AU. All Ports of the ATxmega128A1U-AU are connected to four pin rows with 2.54mm pitch. Besides there are two pads prepared for soldering an external clock.


Features:

  • Atmel's ATxmega128A1U-AU integrated
  • All Ports available on pin rows (2.54mm pitch)
  • Dimensions: 69x69mm
  • All Pins are labled with the port names of the ATxmega128A1U-AU


Downloads:

The ATxmega128A1U Centipede can be ordered at our Shop



Personal tools