machine data format

From InCircuit
Jump to: navigation, search

PAP list example

RefDes IC-Art# Value PartDecal Orient. X Y Seite Class PinCnt DISTRIB_NAME DISTRIB# DISTRIB_NPPU
C1 123.456 100nF 0603 0 12.05 14.75 Oben SMD
C2 13pF 0805 90 122.37 18.25 Unten SMD Digikey 1276-2582-1-ND 0,2
D1 LST679 P-LCC-2 180 45.07 33.88 Oben SMD Mouser 720-LST679D1F21Z 0,14
F1 Sicherung Littlefuse 270 12.05 14.75 Oben SMD Farnell 1596915 0,971
IC1 FT232RL SSOP28 45 15.02 19.35 Oben SMD Digikey 768-1007-1-ND 3,63
IC2 456.789 7812 TO220 90 122.00 26.35 Oben THT
R1 470R 0402 270 18.45 114.85 Oben DNP Digikey 311-470LRCT-ND 0,08
J1 789.123 Stiftleiste 40x1 RM2.54 H7.1 STL_10X1_RM2.54_H6.0_THT 270.000 1.050 19.000 Unten THT 10

Description

  • RefDes = part reference
  • IC-Art# = internal material number from article data base (if material number is not available, the three "DISTRIB" fields must be filled in)
  • Value = part value with unit (100nF, 470R, 100k, 10M)
  • PartDecal = part footprint
  • Orient. = part orientation (90°, 180.33°, 270°, ...) without unit (point (.) as delimiter)
  • X = part X coordinate on board, unit millimeter (mm), part centre is point of reference, bottom left corner is point of origin (point (.) as delimiter)
  • Y = part Y coordinate on board, unit millimeter (mm), part centre is point of reference, bottom left corner is point of origin (point (.) as delimiter)
  • Seite = side for part placement: Oben = top, Unten = bottom
  • Class = part class: SMD = surface mounting, THT = through hole mounting, DNP = do not place, MEC = mechanical parts
  • PinCnt = the number of single pins if the part is seperatable (number of needed pins)
  • DISTRIB_NAME = name of distributor
  • DISTRIB# = part order number
  • DISTRIB_NPPU = part unit price in € (comma (,) as delimiter)


Format:
The table must be exported as CSV-file, delimiter is a (;) semicolon.
Furthermore the headline is enclosed with two semicolon, the following lines with only one (see PAP example).


Download

PAP example

Personal tools