radino40 DW1000

From InCircuit
Revision as of 10:35, 6 February 2019 by Fklause (Talk | contribs)

Jump to: navigation, search

Hardware

radino40 DW1000 radino40 DW1000


The In-Circuit radino40 DW1000 combines Nordic Semiconductor 's nRF52840 microcontroller and Decawave's DW1000 UWB radio chip in a small form-factor EMC-compliant module.
The DW1000 is a fully integrated single chip Ultra Wideband (UWB) low-power low-cost transceiver IC compliant to IEEE802.15.4-2011.
It can be used in 2-way ranging or TDOA location systems to locate assets to a precision of 10 cm. It supports data transfer at rates up to 6.8 Mbps.
The Nordic Semiconductor's nRF52840 with 32-bit ARM® Cortex®-M4 CPU mit FPU, 64 MHz Clock, 1Mb flash, 256 MB RAM offers great performance and Bluetooth 5 functionality. The radino40 modules are pin-to-pin compatible.
With its powerful processor, the DW1000 UWB-chip and its small size, the radino40 DW1000 is the perfect base for RTLS-systems

radino40 DW1000

Features:

  • UWB Transeiver DW1000 by Decawave
    • IEEE802.15.4-2011 UWB compliant
    • Supports 6 RF bands from 3.5 GHz to 6.5 GHz
    • Data rates of 110 kbps, 850 kbps, 6.8 Mbps
  • nRF521840 by Nordic Semiconductors
    • 32-bit ARM® Cortex®-M4 CPU with FPU, 64 MHz
    • 1 Mbyte Flash, 256 kbyte RAM
    • Dynamic multiprotocol-transceiver:
      • Bluetooth 5 / Bluetooth Low Energy
      • IEEE 802.15.4/Thread
      • ANT/ANT+
      • Proprietary 2,4 GHz
    • 4x4 channel pwm unit with EasyDMA
    • 12 bit 200 ksps ADC
    • 5x 32 bit timer with counter mode
    • USB 2.0, I²C, QSPI, SPI, UART, NFC-A
    • Qadrature decoder (QDEC)
    • 3x RTC
  • 37 GPIOs

Suitable application development boards

Board Pictures Description
radino40 DW1000 USB-Stick radino40 dw1000 USB Stick enclosed 45 1000.jpg
radino40 dw1000 USB Stick 45 1000.jpg
USB-Stick with UWB-antenna, Bluetooth®-antenna, USB-A plug and 6-Pin TC2030 CTX Plug-of-NailsTM SWD connector for programming and debugging
radino40 DW1000 Breakout radino40 WD1000 Breakout 45 1000.jpg application development board with 3.3V voltage regulator, USB micro connector, 6-Pin TC2030 TCX Plug-of-NailsTM SWD connector for programming and debugging, BMI160 low power IMU, LiPo/Li-Ion charger, 2 push buttons, 3 LEDs, UWB- and Bluetooth®- antenna.

Downloads

Personal tools