ICfly-PowerFLARM-Adapter
The ICfly-PowerFLARM-Adapter connects a PowerFLARM traffic sensor to the ICfly bus. Traffic information from the FLARM then appears on the ICflyDisplay — alongside the artificial horizon and the engine data, without a second device in the panel.
Part number 902.174A002 — Shop
Connections
| Side | Connector | Purpose |
|---|---|---|
| PowerFLARM | female DE-15 | link to the traffic sensor |
| ICfly | female DE-15 | ICfly bus to the display and other devices |
| Power | 5-pin connector | power supply and optional systems such as an autopilot |
Installation
- Fit the adapter between the PowerFLARM and the ICfly bus.
- Connect the supply to the 5-pin connector.
- Enable the traffic display on the ICflyDisplay.
The adapter has nothing to configure: it passes on whatever the sensor delivers. If no traffic appears, the cause is the sensor or the wiring, not the adapter.
Siblings
The same adapter is available for other traffic sensors:
- ICfly-TRX1500-Adapter — for the TRX-1500
- ICfly-TRX2000-Adapter — for the TRX-2000 (RJ-45 port 1)
Downloads
- Datasheet: ICfly-TRX-Adapter — covers the whole adapter family
See also
- ICfly Avionics — system overview
- ICflyDisplay — shows the traffic information
- ICflyTraffic — the In-Circuit traffic receiver