Setting up ICflyConnect for SkyDemon
SkyDemon connects to the ICflyConnect using the AirConnect method. Address, ports and key must match on both sides; with differing values no connection is established.
On the ICflyConnect
Join the device's access point and open its configuration page in the browser.
| Setting | Value |
|---|---|
| Data Format | NMEA |
| Serial1 Baudrate | 19200 |
| Serial1 → WLAN | active |
| IP | 192.168.42.1 |
| UDP port | 46400 |
| TCP port | 2000 |
In SkyDemon
| Setting | Value |
|---|---|
| FLARM with Air connect | ON |
| Air connect Key | 9999 |
Troubleshooting
- Is the tablet actually on the ICflyConnect's Wi-Fi — or has it fallen back to mobile data?
- Does the interface baud rate match the device connected to it?
- Is the device on the bus producing data at all? An ICflyDisplay on the same bus shows it straight away.
See also
- ICflyConnect — the device
- ICfly Avionics — system overview