ICPROX charging tray
The ICPROX charging tray takes four tags side by side. The tags are simply set into it — the contacts find each other, there is nothing to plug in.
The tray is powered over USB-C. It therefore fits any workplace where power is already present: at the shift handover, in the break room, on the workbench.
The state of charge is read on the tag itself, not on the tray. One glance shows which tag is ready and which still needs time.
Two versions
Both trays carry the same electronics and the same supply. What differs is the printed enclosure: the recesses are cut to the respective tag version, which makes width and height differ slightly.
| Part number | For | Charging bays | Supply | Dimensions (L × W × H) | Weight |
|---|---|---|---|---|---|
| 902.237 | ICPROX-Tag | 4 | USB-C | 244 × 28 × 47 mm | 50 g |
| 902.237A001 | ICPROX-Tag S | 4 | USB-C | 244 × 26 × 44 mm | 50 g |
Features
- Four charging bays side by side
- Tags are only set in place, no connectors
- Meant for shift work: one tray per handover point
- State of charge shown on the tag, not on the tray
Enclosure
The enclosure is made in our own production in Dresden, from PA12 by HP Jet Fusion.
See also
- ICPROX — system overview
- ICPROX-Tag · ICPROX-Tag S