ICPROX Setup Tool (USB)
The ICPROX Setup Tool reaches an ICPROX-CPU over a plain USB cable, straight from the browser. It shows and changes the same settings as the Wi-Fi web interface. The USB connection is independent of radio conditions and therefore suits environments with heavy Wi-Fi occupancy, devices that switch to mobile data on their own, and vehicles outside Wi-Fi range.
→ Open the tool (English) · Deutsche Fassung
What you need
- Chrome or Edge — the tool uses Web Serial, which Firefox and Safari do not provide
- A USB cable to the control unit
- An ICPROX-KEY in range, for changes (see below)
No installation is required: the tool consists of a single HTML file and runs entirely in the browser. No data is transmitted to any server.
What it can do
- Show and change the vehicle settings — the same ones as in the web interface
- Show the live status: detected tags, connections, inputs and relays
- Upload and install firmware for the devices on the vehicle
- Read out which devices are connected and which versions they run
Changes need the KEY
Read access is available at any time. Changing a setting requires an ICPROX-KEY in range — the same condition applies over Wi-Fi; the USB connection does not bypass the release. The key symbol at the top right shows the current state; if the key is missing, the tool reports this before the write is attempted.
Getting started
- Open the tool in Chrome or Edge.
- Connect the control unit to the computer with a USB cable.
- Press Connect and pick the serial port offered.
- Power the ICPROX-KEY and bring it near the vehicle if you intend to change anything.
- Work through the tabs; every change is confirmed on screen.
Troubleshooting
| Symptom | Possible cause / remedy |
|---|---|
| No port offered | Wrong browser (Web Serial is Chrome/Edge only), cable is charge-only, or the control unit has no power |
| Changes are refused | No ICPROX-KEY in range — check the key symbol at the top right |
| Page opens but stays empty | Reload with Ctrl+F5; if it was saved locally, download it again from the link above |
See also
- ICPROX-CPU — the control unit this tool talks to
- ICPROX-KEY — the key that permits changes
- ICPROX-P — the vehicle system as a whole
- ICPROX — system overview