Skip to main content

radino40 CC1101

Hardware​

radino40 CC1101
radino40 CC1101 433MHz
radino40 CC1101
radino40 CC1101 868 MHz
radino40 DW1000 Bottom
Bottom View

The In-Circuit radino40 CC1101 combines Nordic Semiconductor's nRF52840 microcontroller with the CC1101 RF Transceiver in a small form-factor EMC-compliant module.
The Nordic Semiconductor's nRF52840 with 32-bit ARM® Cortex®-M4 CPU with FPU, 64 MHz Clock, 1Mb flash, 256 kB RAM offers great performance and Bluetooth 5 functionality. The radino40 modules are pin-to-pin compatible.
With its powerful processor and the CC1101 radio chip, the radino40 CC1101 is the perfect base for 868MHz/433MHz ISM band solutions.

Features:

  • RF Transceiver CC1101 connected internally (Datasheet Texas Instruments CC1101)

  • Wide range of possible protocols

  • Available for 433MHz & 868/915MHz (assembly option for BALUN)

  • nRF52840 by Nordic Semiconductors

    • 32-bit ARM® Cortex®-M4 CPU with FPU, 64 MHz

    • 1 Mbyte Flash, 256 kbyte RAM

    • Dynamic multiprotocol-transceiver:

      • Bluetooth 5 / Bluetooth Low Energy
      • IEEE 802.15.4/Thread
      • ANT/ANT+
      • Proprietary 2,4 GHz

    • 4x4 channel pwm unit with EasyDMA

    • 12 bit 200 ksps ADC

    • 5x 32 bit timer with counter mode

    • USB 2.0, I²C, QSPI, SPI, UART, NFC-A

    • Quadrature decoder (QDEC)

    • 3x RTC

  • 37 GPIOs

Applications​

  • Ultra low power wireless applications operating in the 433/868/915 MHz ISM/SRD bands
  • Wireless alarm and security systems
  • Industrial monitoring and control
  • Wireless sensor networks
  • AMR – Automatic Meter Reading
  • Home and building automation
  • Wireless MBUS

Suitable application development boards​

Compatible ADBADB ImageForm Factor / FeaturesStatus
radino40 Spider RP-SMA901.327E001 45 1000 s.pngBreadboard adapter for all radino40 modules. The radino40 without primary radio frontend uses the wire antenna for 2.4G - the RPSMA-antenna is internally not connected.Active
radino40 Stick RP-SMA901.549B radino40 DW1000 45 1000 s.pngUSB-Stick for all radino40 modules. The radino40 without primary radio frontend uses the wire antenna for 2.4G - the RPSMA-antenna is internally not connected.Active
SpiderR40ESP32C3SpiderR40ESP32C3Carrier board with a second processor, ESP32-C3 (WiFi, Bluetooth LE). USB-C, RP-SMA socket, all connections of the module on solder pads, 2.54 mm pitch; 50.8 × 25.4 mm. Supplied with the radino40 soldered on.Active

Pinout​

radino40 Pinout
Pinout

Downloads​