Difference between revisions of "ICnova SAM9G45 OEM"
Line 27: | Line 27: | ||
*1xHigh speed (480MBit) USB Host | *1xHigh speed (480MBit) USB Host | ||
*1xHigh speed (480MBit) USB Device (configurable by software as 2nd Host) | *1xHigh speed (480MBit) USB Device (configurable by software as 2nd Host) | ||
− | * | + | *Voltage regulators for 3.3V and 1.8V core voltage |
− | * | + | *All peripherals are accessible on connectors |
− | * | + | *Extreme compact design with 40x35mm overall size |
Line 44: | Line 44: | ||
|+ <!--suitable Application Development Boards--> | |+ <!--suitable Application Development Boards--> | ||
|- | |- | ||
− | ! Evaluation board | + | !Evaluation board |
!Main features | !Main features | ||
|- | |- |
Revision as of 12:07, 19 April 2013
Contents |
Hardware
ICnova SAM9G45 OEM - ultra small size meets highest performance
By using the ICnova SAM9G45 OEM module there is no need to develop a multilayer pcb for external components.
The board is ready to go and needs only a single power supply voltage of 3.3V to 5V.
It can easily be snapped into the matching sockets.
The device is equipped with an Atmel AT91SAM9G45 MCU or its sister MCU Atmel AT91SAM9M10. It operates with an ARM926EJS core at 400MHz CPU clock.
A free Eagle Library is available in the downloads section.
Features:
- Atmel ARM9 AT91SAM9G45B processor with up to 400 MHz CPU clock
- 128MB DDR2-RAM
- 1MB NOR-Flash
- 256MB NAND Flash
- 1xHigh speed (480MBit) USB Host
- 1xHigh speed (480MBit) USB Device (configurable by software as 2nd Host)
- Voltage regulators for 3.3V and 1.8V core voltage
- All peripherals are accessible on connectors
- Extreme compact design with 40x35mm overall size
Compatible evaluation boards
In-Circuit offers a wide range of evaluation boards that can be used to develop your products and solutions while reducing your development time. These evaluation boards help you to evaluate the features and performance of selected products and system solutions. Our evaluation boards demonstrate optimized and tested solutions for your application design. These boards are designed mainly for your evaluation, design and testing purposes.
The table below shows the suitable Application Development Boards (ADB) for the ICnova SAM9G45 OEM.
Evaluation board | Main features |
---|---|
ADB1000 | 1x 10/100 Base-T-Ethernet-Port; 3x High-Speed-USB 2.0 ports (only with an ICnova OEMplus module); 1x USB-Device Port; connector for a TFT-Touchscreen display; 4 USART interfaces; 1x SD/MMC card reader; 2x RS485 Interfaces; Real-Time-Clock buffered with Li-Ion battery |
ADB1002 | 1x 10/100 Base-T-Ethernet-Port; 1x High-Speed-USB 2.0 Host port; 1x USB-Device Port; 1x DVI output for direct monitor support; 2x µSD card reader; 1x Real-Time-Clock buffered with Li-Ion battery; 1x JTAG-interface (compatible with JTAGICE-mkII) |
ADB1003 | 1x 10/100 Base-T-Ethernet-Port; 1x JTAG-interface; I/O Extender Board for all ICnova OEM Modules; all free pins of the OEM-Modules are routed to additional pin-headers |
ADB3000 | 1x 10/100 Base-T-Ethernet-Port; 1x High-Speed-USB 2.0 Host port; 1x USB-Device Port; connector for a TFT-Touchscreen display; 1x µSD card reader; USART, SPI, I2C Interfaces; 1x µSD card reader |
Software
All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box. For some configuration a suitable Android-Image is provided, too.
The Support-CD contains all sources, incl. Linux 2.6.28, which are needed to build a toolchain and a working filesystem for the ICnova SAM9G45 OEM.
Downloads
Gerber Footprint ICnova SAM9G45 OEM