Difference between revisions of "NAND-Connection ICnova SAM9G45"
From InCircuit
Line 22: | Line 22: | ||
To acccess the NAND-Device using a custom bootloader, the AT91SAM9G45 EBI Interface must be configured accordingly and the EBI_CS3A Bit in the EBICSA Register must be set to activate NAND-Logic. | To acccess the NAND-Device using a custom bootloader, the AT91SAM9G45 EBI Interface must be configured accordingly and the EBI_CS3A Bit in the EBICSA Register must be set to activate NAND-Logic. | ||
− | [[Category:ICnova_SAM9G45]] | + | [[Category:ICnova_SAM9G45]] [[Category:HowTo]] |
Latest revision as of 15:16, 19 December 2013
The NAND-Flash used on ICnova SAM9G45 OEM and ICnova SAM9G45 SODIMM is the same and connected nearly equally. The following parameters are met for this device:
Typ | NAND02GW3B2 |
VCC | 3.3V |
Buswidth | 8bit |
Startaddress | 0x40000000 |
ALE-AddressBit | 21 (0x40200000) |
CLE-AddressBit | 22 (0x40400000) |
CE on GPIO | PortC Pin8 on OEM, Pin 14 on SO-DIMM |
RnB on GPIO | PortC Pin11 on OEM, Pin 8 on SO-DIMM |
To acccess the NAND-Device using a custom bootloader, the AT91SAM9G45 EBI Interface must be configured accordingly and the EBI_CS3A Bit in the EBICSA Register must be set to activate NAND-Logic.