DIN Rail CPU 60
Contents |
Hardware
DIN Rail CPU 60 - high end Cortex-A8 Embedded PC Module
The device DIN Rail CPU 60 is equipped with an ICnova i.MX 536 SODIMM module.
It operates with an Freescale i.MX536 Cortex-A8 core at 800MHz CPU clock.
Features:
- ICnova i.MX 536 SODIMM module with up to 800 MHz CPU clock
- 512MB DDR3-RAM
- 8MB NOR-Flash
- 4GB NAND-Flash
- External µSD cardreader
- 2x ADC Input / 2x DAC Output
- 4x digital input
- 4x RS485, 1x CAN, 2x RS232 interface
- 1x 10/100 Base-T-Ethernet-Port
- Each 1x UART for uplink and downlink
- 2x USB interface ( 1x Host, 1x Device)
- Arbitrary number of modules mountable side by side
- Easy connection of all modules with BUS connector
- All modules can communicate via UART and RS485
- DIN Rail enclosure: 6 pitch units (div)
- Other DIN-Rail modules available
- Linux OS, toolchain and sources are included
- Input voltage: 24V DC
- Tempearture range from -10°C to +70°C
Software
All Modules provided by In-Circuit usually have a Buildroot based system preinstalled, so they can be used out of the box.
The Support-CD contains all sources, incl. Linux 2.6.28, which are needed to build a toolchain and a working filesystem for the DIN Rail CPU 60.
More information about the ICnova i.MX 536 SODIMM Module can be found on the ICnova i.MX536 SODIMM site.
Additional Information
Accessing the 7 Segment Display
The DIN Rail CPU 60 have an 7 Segment BCD Display on board. This diplay will control from the Linux OS on the board. You can write characters on the display with the following command:
$ echo cf > /sys/bus/spi/devices/spi2.0/bcd