ICnova ADB4001
From InCircuit
Hardware
The ICnova ADB4001 has the following features:
- Socket for ICnova iMX536 SODIMM Module
- PSoC µController as IO processor and Supervisor
- DVI connector
- 7inch TFT touch display (800x480 pixels)
- 1x 10/100 MBit Ethernet
- 2x 480MBit USB Host
- 1x 480MBit USB Device
- Terminal block with RS485, CAN, 2x analog inputs, 1x analog output, 1x Relay-output
- 3 capacitive user buttons
- Buzzer output
- Soundcard with 2x line in (chinch), 1x headphone out, 1x speaker mounted
- Video in Chinch Jack (for external cameras)
- 2 µSD card holder
- 2 sockets for ICradio OEM modules, connected to two UARTs of the SODIMM module
- single supply 24V jack
- JTAG connector for SODIMM module
- All required tools
- Source-codes for software (Linux+Application)
- Documentation and HowTos
The ICnova ADB4001 can be ordered at our Shop. Different Starter kits with ICnova CPU-Modules and Touchscreens are also available in the Shop
Software
All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box. For some configuration a suitable Android-Image is provided, too.
The Board support package including all sources to build a working Kernel for the iMX536 on the ADB4001 can be downloaded here: http://www.ic42.de/BSP/icnova/br2012.11-imx536adb4001-901.304-lin2.6.35-20140910_complete.tar.bz2
Boardprocessor
- To access the Board Processor on the ADB 4001 use the interface provided under "/sys/bus/spi/devices/spi2.0/"
- Some devices may also be mapped to other parts of the filesystem.
- Touchscreen data is available under "/dev/input/"
- The gpios are accessible under "/sys/class/gpio/"
- "echo 240 > /sys/class/gpio/export" makes gpio 240 available as "/sys/class/gpio/gpio240/"
- for output pins the direction has to be configured using "echo out > /sys/class/gpio/gpio240/direction"
Mapping on the ADB4001
Function: | DigIn1 |
---|---|
Adress: | gpio |