ICnova ADB4000

From InCircuit
Jump to: navigation, search
This product is End of Life
This product is End of Life

Contents

Hardware

ICnova ADB4000

The ICnova ADB4000 is a ready to go touch display solution with 5inch or 8inch display and ICnova SAM9G45 SODIMM. Just connect to power and see the Linux or Android booting up in display!


The ICnova ADB4000 is designed for:

  • Smart Home Applications
  • Data logger for Solar applications
  • Industrial control devices


The ICnova ADB4000 has the following features:

  • 1x 10/100 Base-T-Ethernet-Port
  • 3x High-Speed-USB 2.0 Host ports
  • 1x High-Speed-USB 2.0 Device Port
  • 1x TFT-Touchscreen display connector
  • 2x SD/MMC card holder with MMI interface
  • 1x DBG UART
  • 3x isolated RS485 interfaces
  • 1x CAN interface
  • 1x RS232 interface
  • 1x I2C interface
  • 1x Buzzer
  • 1x Real-Time-Clock battery buffered
  • 5x Digital inputs
  • 2x Analog inputs 0-10V or 4-20mA
  • 1x Line-In
  • 1x Line-Out
  • 1x Mic-In
  • 1x Headphone-Out
  • 2x JTAG-interface (compatible with JTAGICE-mkII)
  • 2x Socket for ICradio OEM Modules
  • Dimensions: 180mm x 120mm
  • Temperature range from -20°C to +70°C
  • Input voltage: 24V DC

Suitable modules

In order to utilize the interfaces of the ADBs a CPU module has to be mounted.

The following table lists modules compatible with the ICnova ADB4000.

Module Picture Description Main features Notes
ICnova SAM9G45 SODIMM
Icnova sam9g45 sodimm.jpg
Atmel ARM9 AT91SAM9G45B, 400MHz

Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.

If you are new to kernel building please refer to First Steps with Buildroot.

The board support packages for the modules on the ICnova ADB4000 can be found on the modules page.

Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none are found.

For some configuration a suitable Android-Image is provided, too. Apps can easily be copied to a micro-SD card and inserted into the SD-Card slot of the ADB4000. The system copies the application automatically into its system folder and it can be started immediately.

Demonstration of the ADB4000s GPIOs

Downloads

Datasheet ICnova ADB4000

Schematic ICnova ADB4000

Flyer ICnova ADB4000

Personal tools