ICnova AP7000 OEM
Contents |
Hardware
ICnova AP7000 OEM - ultra small size meets highest performance
One of the smallest available AVR32 AP7000 based Linux boards. The board is ready to go and needs only a single 3.3V power supply. All Linux sources are open source and can be ordered on a CD.
By using the ICnova AP7000 OEM module there is no need to develop a multilayer pcb for external components. The module can be snapped easily into the matching sockets.
A free Eagle Library is in the download section available.
The ICnova AP7000 OEM has the following features:
- AT32AP7000 processor with up to 210 DMIPS throughput at 140 MHz
- 64MB SD-RAM on a 32Bit wide bus
- 8MB NOR-Flash as application memory
- voltage regulator for 1.8V core voltage
- all peripherals are accessible on connectors
- extreme compact design with 40x35mm overall size
- long term deliverable (>5 years)
Compatible evaluation boards
In-Circuit offers a wide range of evaluation boards that can be used to develop your products and solutions while reducing your development time. These evaluation boards help you to evaluate the features and performance of selected products and system solutions. Our evaluation boards demonstrate optimized and tested solutions for your application design. These boards are designed mainly for your evaluation, design and testing purposes.
The table below shows the suitable Application Development Boards (ADB) for the ICnova AP7000 OEM.
| Evaluation board | Main features |
|---|---|
| ADB1000 | 1x 10/100 Base-T-Ethernet-Port; 3x High-Speed-USB 2.0 ports (only with an ICnova OEMplus module); 1x USB-Device Port; connector for a TFT-Touchscreen display; 4 USART interfaces; 1x SD/MMC card reader; 2x RS485 Interfaces; Real-Time-Clock buffered with Li-Ion battery |
| ADB1001 | 2x 10/100 Base-T-Ethernet-Port; 1x High-Speed-USB 2.0 port (only with an ICnova OEMplus module); 1x USB-Device Port; 4 USART interfaces; 1x µSD card reader; Real-Time-Clock buffered with Li-Ion battery; 1x JTAG-interface (compatible with JTAGICE-mkII) |
| ADB1002 | 1x 10/100 Base-T-Ethernet-Port; 1x High-Speed-USB 2.0 Host port; 1x USB-Device Port; 1x DVI output for direct monitor support; 2x µSD card reader; 1x Real-Time-Clock buffered with Li-Ion battery; 1x JTAG-interface (compatible with JTAGICE-mkII) |
| ADB1003 | 1x 10/100 MBit Ethernet; 1x JTAG-interface; I/O Extender Board for all ICnova OEM Modules; all free pins of the OEM-Modules are routed to additional pin-headers |
| ADB1004 | 1x High-Speed-USB 2.0 Host port; 1x USB-Device Port; RS485, USART, SPI Interfaces; 1x µSD card reader; Real-Time-Clock buffered |
