ICnova AP7000 OEMplus
Contents |
Hardware
ICnova AP7000 OEMplus - with USB 2.0 high speed host
The ICnova AP7000 OEMplus is the smallest AVR32 AP7000 based linux board with an USB host interface. A missing USB-Host on the AT32AP7000 is no constraint any more and hooking up an external hard drive or an optical drive is easily done. This module is equipped with a huge amount of memory to realise even complex applications without memory extension. It has 256MB NAND Flash, 64MB Mobile SD-RAM and 1MB NOR-Flash for the bootloader. The SD-RAM is connected with a 32bit wide bus to use the full performance of the AT32AP7000. The board is ready to go and needs only a single 3.3V power supply. All Linux sources are open source and can be ordered on a CD. By using the ICnova AP7000 OEMplus module there is no need to develop a multilayer pcb for external components. The board can easily be snapped into the matching sockets.
A free Eagle Library is available in the downloads section.
The ICnova AP7000 OEMplus has the following features:
- AT32AP7000 processor with up to 210DMPIS at 140MHz clock
- 64MB SDRAM
- 8MB NOR-Flash, 16 bit wide
- 256MB NAND
- internal Vreg, VIN=3.3V
- all peripherals available at connectors
- very small footprint 40mm x 35mm
- long term availability (>5 years)
The ICnova AP7000 OEMplus can be ordered at our Shop.
Different Starter kits with appropriate Application Development Boards and Touchscreens are also available in the Shop
Suitable application development boards
adbs adbs adbs adbs adbs adbs adbs adbs
Software
Downloads
Datasheet ICnova AP7000 OEMplus
Footprint ICnova AP7000 OEMplus
Gerber Footprint ICnova AP7000 OEMplus