ICnova AP7000 OEMplus

Hardware

ICnova AP7000 OEMplus - with USB 2.0 high speed host

The ICnova AP7000 OEMplus is the smallest AVR32 AP7000 based linux board with an USB host interface. A missing USB-Host on the AT32AP7000 is no constraint any more and hooking up an external hard drive or an optical drive is easily done. This module is equipped with a huge amount of memory to realise even complex applications without memory extension. It has 256MB NAND Flash, 64MB Mobile SD-RAM and 1MB NOR-Flash for the bootloader. The SD-RAM is connected with a 32bit wide bus to use the full performance of the AT32AP7000. The board is ready to go and needs only a single 3.3V power supply. All Linux sources are open source and can be ordered on a CD. By using the ICnova AP7000 OEMplus module there is no need to develop a multilayer pcb for external components. The board can easily be snapped into the matching sockets.

A free Eagle Library is available in the downloads section.

The ICnova AP7000 OEMplus has the following features:

AT32AP7000 processor with up to 210DMPIS at 140MHz clock
64MB SDRAM
8MB NOR-Flash, 16 bit wide
256MB NAND
internal Vreg, VIN=3.3V
all peripherals available at connectors
very small footprint 40mm x 35mm
long term availability (>5 years)

The ICnova AP7000 OEMplus can be ordered at our Shop. Different Starter kits with appropriate Application Development Boards and Touchscreens are also available in the Shop