From InCircuit
Jump to: navigation, search



ICnova SAM9G45 SODIMM - high performance ARM9 SODIMM-200 module


The device ICnova SAM9G45 SODIMM is equipped with an Atmel AT91SAM9G45 MCU or its sister MCU Atmel AT91SAM9M10. It operates with an ARM926EJS core at 400MHz CPU clock.


  • Atmel ARM9 AT91SAM9G45B processor with up to 400 MHz CPU clock
  • 128MB DDR2-RAM
  • 8MB NOR-Flash
  • 256MB NAND-Flash
  • integrated 10/100 MBit Ethernet PHY
  • voltage regulators for 3.3V, 2.5V and 1.8V core voltage
  • all peripherals are accessible on connectors
  • easy to use SODIMM-200 module (2.5V-Version)
  • Commercial temperature range from -10°C to +70°C
  • Industrial temperature range from -40°C to +85°C also available

Suitable application development boards

In-Circuit offers a wide range of Application Development Boards that can be used to develop your products and solutions while reducing your development time.

These evaluation boards help you to evaluate the features and performance of selected products and system solutions. Our evaluation boards demonstrate optimized and tested solutions for your application design. These boards are designed mainly for your evaluation, design and testing purposes.

Basically all our ADBs feature: Ethernet, USB-Host, USB_Device, SDC
Exceptions to this are listed in the Notes column of the following table.

The table below shows the suitable Application Development Boards (ADB) for the ICnova SAM9G45 SODIMM.

ADB Picture Supply voltage Main features Notes

ICnova ADB4004
ICnova ADB4004.jpeg
12-24V DC TFT-Touchscreen connector, RS485, RS422, RS232, I2C, RTC, Buzzer, GPIO pin headers

for ICnova SAM9G45 SODIMM


All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.

If you are new to kernel building please refer to First Steps with Buildroot.

The board support package contains all sources required to build the linux image for the ICnova SAM9G45 SODIMM on the main ADB.
The most recent version is listed at the bottom of this page. Other versions can be found on the Downloads page.

Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none is found.

On the ICnova SAM9G45 SODIMM the bootloader u-boot is preinstalled on the on-board flash.


Most recent board support package

Datasheet ICnova SAM9G45 SODIMM

Footprint ICnova SAM9G45 SODIMM

Flyer ADB4000 + SAM9G45 SODIMM + Android

Pinning ICnova SODIMM

Media: 641000003A_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-deutsch.pdf

Media: 641000003A_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-englisch.pdf

Media: 641000003B_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-deutsch.pdf

Media: 641000003B_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-englisch.pdf

Media: 641000003C_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-deutsch.pdf

Media: 641000003C_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-englisch.pdf

Personal tools