View source for Interface Modules

== USB-A UART Bridge CP2104 ==
<div class="tright" style="clear:none">[[File:CP2104_45.jpg |200px | thumb | USB-A UART Bridge CP2104 | link=http://shop.in-circuit.de/product_info.php?cPath=38&products_id=78]]</div>

The USB-UART-Bridge connects UART components with an USB-Host. The Bridge generates a 3.45V Voltage from USB. This can be used to supply the microcontroller over a jumper (maximum 100mA@3.45V).


'''Features:'''
*Baud rate: 300Bit/sec up to 2MBit/sec
*GPIOs 0-3 are set to push/pull at delivery state! (so LEDs, TxEN and GPIO are working)
*Voltage-regulator: up to 100mA@3.45V
*LEDs: Power, RX and TX
*IO: RX ( to connect with RX on the µC),TX (to connect with TX on the µC), GND, VCC
*Size: (LxWxH)(mm): 52.0 x 17.0 x 5.2

<br/>
'''Downloads:'''<br/>
*Driver: [http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx CP210x Driver]<br/>
*Datasheet: [[Media: 305000103A USB-A UART Bridge CP2104.pdf | Datasheet USB-A UART Bridge CP2104]]<br/>
*Schematic: [[Media: 610000264A.pdf | Schematic USB-A UART Bridge CP2104]]<br/><br/>

The USB-A UART Bridge CP2104 can be ordered at our [https://www.in-circuit.de/product-category/zubehoer/ Shop]
<div style="clear:both"></div>
<br/><br/>

== USB-A UART Bridge CP2102 ==
<div class="tright" style="clear:none">[[File:USB-A UART Bridge.jpeg |200px | thumb | USB-A UART Bridge CP2102 | link=http://shop.in-circuit.de/product_info.php?cPath=38&products_id=79]]</div>

The USB-UART-Bridge connects UART components with an USB-Host. The Bridge generates a 3.3V Voltage from USB. This can be used to supply the microcontroller over a jumper (maximum 100mA@3.3V).


'''Features:'''
*Baud rate: 300Bit/sec up to 1MBit/sec
*Voltage-regulator: up to 100mA@3.3V
*LEDs: Power, RX and TX
*IO: RX ( to connect with RX on the µC),TX (to connect with TX on the µC), GND, VCC
*Size: (LxWxH)(mm): 45.0 x 15.0 x 5.2

<br/>
'''Downloads:'''<br/>
*Driver: [http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx CP210x Driver]<br/>
*[[Media: 301000001B_CP2102.pdf | How to install drivers for CP2102 (german)]]<br/>
*Datasheet: [[Media: 305000104A USB-A UART Bridge CP2102.pdf | Datasheet USB-A UART Bridge CP2102]]<br/>
*Schematic: [[Media: 610000064A.pdf | Schematic USB-A UART Bridge CP2102]]<br/><br/>

The USB-A UART Bridge CP2102 can be ordered at our [https://www.in-circuit.de/product-category/zubehoer/ Shop]
<div style="clear:both"></div>
<br/><br/>

== USB-B UART Bridge CP2102 ==
<div class="tright" style="clear:none">[[File:USB-B UART Bridge.jpeg |200px | thumb | right | USB-B UART Bridge CP2102 | link=http://shop.in-circuit.de/product_info.php?cPath=38&products_id=80]]</div>

The USB-UART-Bridge connects UART components with an USB-Host. The Bridge generates a 3.3V Voltage from USB ( maximum 100mA@3.3V).


'''Features:'''
*Baud rate: 300Bit/sec up to 1MBit/sec
*Voltage-regulator: up to 100mA@3.3V
*LEDs: RX and TX
*IO: RX ( to connect with RX on the µC), TX (to connect with TX on the µC)
*all Handshake signals are available on pin headers

<br/>
'''Downloads:'''<br/>
*Driver: [http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx CP210x Driver]<br/>
*[[Media: 301000001B_CP2102.pdf | How to install drivers for CP2102 (german)]]<br/>
*Datasheet: [[Media: 305000027B_USB-B_UART_Bridge_CP2102.pdf | Datasheet USB-B UART Bridge CP2102]]<br/>
*Schematic: [[Media: 610000128A.pdf | Schematic USB-B UART Bridge CP2102]]<br/><br/>

The USB-B UART Bridge CP2102 can be ordered at our [https://www.in-circuit.de/product-category/zubehoer/ Shop]
<div style="clear:both"></div>
<br/><br/>

== USB UART Bridge ISO ==
<div class="tright" style="clear:none">[[File:USB-UART-Brdige_ISO_45_640.jpg |200px | thumb | USB-A UART Bridge CP2104 | link=http://shop.in-circuit.de/product_info.php?cPath=38&products_id=246]]</div>

The USB UART Bridge ISO connects UART components electrically isolated with an USB-Host. 


'''Features:'''
*USB-B for PC plugging
*Baud rate: up to 3MBit/sec
*LEDs: RX and TX
*IO: RX (to connect with RX on the µC),TX (to connect with TX on the µC), GND and +5V on power supply of the µC 
*Usable with and without flow control

<br/>
'''Downloads:'''<br/>
*Driver: [http://www.ftdichip.com/Drivers/VCP.htm VCP Drivers]<br/>
*Datasheet: [[Media: 305000112A_USB-UART-Bridge_ISO.pdf | Datasheet USB UART Bridge ISO]]<br/><br/>

The USB UART Bridge ISO can be ordered at our [https://www.in-circuit.de/product-category/zubehoer/ Shop]
<div style="clear:both"></div>
<br/><br/>

== USB-RS485-Bridge ==
<div class="tright" style="clear:none">[[File:USB-RS485-Bridge.jpeg |200px | thumb | right |USB-RS485-Bridge | link=http://shop.in-circuit.de/product_info.php?cPath=38&products_id=82]]</div>

The USB-RS485-Bridge connects RS485/422 components with an USB-Host. The Bridge generates it′s supply voltage from USB.
A suitable enclosure is also available.


'''Features:'''
*Baud rate: up to 3MBit/sec
*LEDs: Power=orange, RX=red and TX=green
*IOs: RS485-A, RS485-B,GND

<br/>
'''Downloads:'''<br/>
*Driver: [http://www.ftdichip.com/Drivers/VCP.htm VCP Drivers]<br/>
*Datasheet: [[Media: 305000068A_USB_RS485_Bridge.pdf | Datasheet USB RS485 Bridge]]<br/>
*Schematic: [[Media: 610000191A.pdf | Schematic USB RS485 Bridge]]<br/>
*EU Conformity: [[Media:212000013A001-USB-RS485_Bridge-EU-Conformity.pdf | EU Conformity USB RS485 Bridge]]<br/>
*Datasheet enclosure: [[Media:datasheet_enclosure_usb.pdf | Datasheet enclosure]]<br/><br/>

The USB RS485 Bridge can be ordered at our [https://www.in-circuit.de/product-category/zubehoer/ Shop]
<div style="clear:both"></div>
<br/><br/>

== USB-B-RS232 Bridge ==
<div class="tright" style="clear:none">[[File:USB-B-RS232_Bridge_45.jpg |200px | thumb | right |USB-B-RS232 Bridge | link=http://shop.in-circuit.de/product_info.php?cPath=38&products_id=239]]</div>

The USB-B-RS232 Bridge connects RS232 components with an USB-Host.


'''Features:'''
*Baud rate: up to 250kBit/sec
*LEDs: Link, RX and TX
*RS232 male connector
*USB-B connector

<br/>
'''Downloads:'''<br/>
*Driver: [http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx CP210x Driver]<br/>
*Datasheet: [[Media: 305000105A USB-B-RS232 Bridge.pdf | Datasheet USB-B-RS232 Bridge]]<br/><br/>

The USB-B-RS232 Bridge can be ordered at our [http://shop.in-circuit.de/product_info.php?cPath=38&products_id=239 Shop]
<div style="clear:both"></div>
<br/><br/>

== RS232(DTE)-UART-Bridge ==
<div class="tright" style="clear:none">[[File:RS232-DTE-Bridge_45.jpg |200px | thumb | right |RS232(DTE)-UART-Bridge | link=http://shop.in-circuit.de/product_info.php?cPath=38&products_id=84]]</div>

The RS232(DTE)-UART-Bridge shifts UART levels to RS232. The Bridge is powered with voltages of 3.3V to 5V.


'''Features:'''
*Baud rate up to 256kBit/sec
*Power supply 3.3V to 5V
*LEDs: RX, TX and for valid Data
*IO: RX, TX, GND, VCC
*all Handshake signals are available on pin headers


<br/>
'''Downloads:'''<br/>
*Datasheet: [[Media:305000028A_RS232(DTE)-UART-Bridge.pdf | Datasheet RS232(DTE)-UART-Bridge]] (german)<br/><br/>

The USB-B-RS232 Bridge can be ordered at our [https://www.in-circuit.de/product-category/zubehoer/ Shop]
<div style="clear:both"></div>
<br/><br/>

== RS232(DCE)-UART-Bridge ==
<div class="tright" style="clear:none">[[File:RS232-DCE-Bridge_45.jpg |200px | thumb | right |RS232(DCE)-UART-Bridge | link=http://shop.in-circuit.de/product_info.php?cPath=38&products_id=83]]</div>

The RS232(DCE)-UART-Bridge shifts UART levels to RS232. The Bridge is powered with voltages of 3.3V to 5V.


'''Features:'''
*Baud rate up to 256kBit/sec
*Power supply 3.3V to 5V
*LEDs: RX, TX and for valid Data
*IO: RX, TX, GND, VCC
*all Handshake signals are available on pin headers

<br/>
'''Downloads:'''<br/>
*Datasheet: [[Media:305000029A_RS232(DCE)-UART-Bridge.pdf | Datasheet RS232(DCE)-UART-Bridge]]<br/><br/>

The USB-B-RS232 Bridge can be ordered at our [https://www.in-circuit.de/product-category/zubehoer/ Shop]
<div style="clear:both"></div>
<br/><br/>