Legacy products
From InCircuit
Contents |
radino Modules
| Board | Pictures | Description |
|---|---|---|
| radinoL4 DW1000 |  |
for Ranging and RTLS, Ultra Wideband (UWB), IEEE802.15.4-2011 compliant, 3.5-6.5GHz, 23 GPIOS, I²C, SPI, 2xUART, USB |
| radino32 nRF8001 |  
|
Bluetooth v4.0 compliant, 23 GPIOS, I²C, SPI, 2xUART, USB |
| radino32 WiFi |  
|
802.11 b/g/n, integrated TCP/IP protocol stack, 23 GPIOS, I²C, SPI, 2xUART, USB |
| radino WiFi |    |
802.11 b/g/n, integrated TCP/IP protocol stack, 15 GPIOS, I²C, SPI, UART, USB HID |
| radino nRF8001 |    |
Bluetooth v4.0 compliant, 15 GPIOS, I²C, SPI, UART, USB HID |
| radino CC1101 |    |
integrated CC1101 HF frontend for 433/868/915MHz, 15 GPIOS, I²C, SPI, UART, USB HID |
| radino RF69 |  
|
integrated RF69 HF frontend for 433/868MHz, 15 GPIOS, I²C, SPI, UART, USB HID |
| radino RF233 |  
|
integrated RF233 HF frontend for 2.4GHz, 15 GPIOS, I²C, SPI, UART, USB HID |
| radino UART-Bridge | 
|
UART bridge with power supply and level shifters for all radino modules |
| XBee-PRO Shield | 
|
XBee Pro adapter for all radino modules |
| radino DinRail Adapter |  |
DinRail Adapter connects our RS485 DinRail Bus System to radino modules |
| radino Watch |  |
Battery powered wearable smart device |
radino/radino32 based products
These products are based at our radino, radino32 and radinoL4 series.
| Product | Pictures | Description |
|---|---|---|
| DW1000 Anchor |  |
Anchor for Ranging / RTLS applications with radino32 DW1000 Ultra Wide Band module. |
| DW1000 Tag |  |
Tag for Ranging / RTLS applications with radino32 DW1000 Ultra Wide Band module. |
| DW1000 Tag IP65 |  |
Tag for Ranging / RTLS applications with radino32 DW1000 Ultra Wide Band module in an IP65 enclosure. |
| radino IP65-Radar |  |
Free programmable radar sensor module for relative speed measurement and motion detection with the RSM-1650 radar sensor. |
DIY / open source
Our DIY / open source projects are exemplary applications for our radino Modules.
| Project | Pictures | Description | Notes |
|---|---|---|---|
| Open Source Blinds Controller |  
|
Open Source Blinds Controller: radio controller for blinds, garage doors, window openers... |
3D Printer
| Product | Pictures | Description |
|---|---|---|
| 3Dino |  |
Low budget stand alone Delta 3D-Printer |
ICnova CPU-Modules
| Module | Picture | Description | Main features | Notes |
|---|---|---|---|---|
| ICnova AP7000 OEM |  |
Atmel AVR32 AT32AP7000, 140MHz |
no USB Host | AP7000 discontinued, only few in stock |
| ICnova AP7000 OEMplus |  |
Atmel AVR32 AT32AP7000, 140MHz |
AP7000 discontinued, only few in stock | |
| ICnova AP7000 Base |  |
Atmel AVR32 AT32AP7000, 140MHz |
AP7000 discontinued, only few in stock | |
| ICnova SAM9G45+XC3S700AN OEM |  |
Atmel ARM9 AT91SAM9G45B, 400Mhz |
Integrated SPARTAN 3AN FPGA | |
| ICnova SAMA5D36 SODIMM |  |
Atmel ARM CORTEX-A5, 536MHz |
2xEthernet, CAN | |
| ICnova i.MX535 SODIMM |  |
Freescale i.MX535 with Cortex-A8 at 1000MHz 512MB Ram, 8MB NOR, 4GB NAND, IGP |
2xSDC | |
| ICnova i.MX536 SODIMM |  |
Freescale i.MX536 with Cortex-A8 at 800MHz 512MB Ram, 8MB NOR, 4GB NAND, IGP |
2xSDC, CAN | |
| ICnova i.MX353 OEM |  |
Freescale i.MX353 ARM11, 533MHz |
Application Development Boards
| ADB | Picture | Supply voltage | Main features | Notes |
|---|---|---|---|---|
| ICnova ADB1001 |  |
|||
| ICnova ADB1002 |  |
|||
| ICnova ADB1003 |  |
development halted | ||
| ICnova ADB1004 |  |
for all ICnova CPU modules with OEM-shape (ICnova SAM9G45 OEM, ICnova iMX353 OEM...) | development halted
| |
| ICnova ADB3000 |  |
5V DC | TFT Touchscreen connector, I2C, integrated OpenOCD adapter and UART Bridge, GPIO pin headers | |
| ICnova ADB4000 |  |
24V DC | TFT Touchscreen connector, 2x SDC, 3x RS485, RS232, CAN, I2C, RTC, Buzzer, 5x Digital IN, 2x ADC, Soundcard, 2x socket for ICRadio module | |
| ICnova ADB4001 |  |
24V DC | PSoC µC io-extender, DVI connector, 7" Touch display, RS485, RS232, CAN, 2xADC, DAC, Relays out, Buzzer, Soundcard, Video IN, 2xSDC, 2x socket for ICradio-ZWIR4512-OEM modules | No Hardware CAN with iMX535 |
| ICnova ADB4003 |  |
12-24V DC | 2x Ethernet, TFT-Touchscreen connector, 2x RS485, RS422, RS232, CAN, I2C, RTC, Buzzer, GPIO pin headers |
DIN Rail Modules
All our rail modules are connectable with BUS connectors.
Over this bus, the modules share a 24V power supply and are connected via RS485.
On the RS485 connection the DIN Rail BUS Protocol can be used for communication.
| Module | Picture | Width | CPU/MCU | Features |
|---|---|---|---|---|
| DIN Rail Radioadapter |  |
1TE |
| |
| DIN Rail CPU 61 |  |
6TE | ||
| DIN Rail CPU 60 |  |
6TE | ICnova i.MX536 SODIMM | Cortex-A8@800MHz, 4GB NAND-Flash, Linux BSP, Ethernet, RS485, RS232, CAN, USB, Digital Inputs, DAC, ADC |
| DIN Rail Relais 6I6S |  |
6TE | ATXMEGA 128 | 6x Digital input, 6x Relays output |
| DIN Rail ADDA 6I4O |  |
6TE | ATXMEGA 128 | 4x Digital input, 6x ADC input, 4x DAC output |
| DIN Rail LED-Dimmer |  |
6TE | PSoC 3 | |
| DIN Rail PWM-Driver |  |
6TE | PSoC 3 | 15x PWM-Driver output, 8x Digital input
|
| DIN Rail CPU 10 |  |
1TE | ICnova SAM9G45 OEM | ARM9@400MHz, 256MB NAND-Flash, Linux BSP, Ethernet, RS485 |
| radino DinRail 6S2I |  |
1TE | radino32 WiFi preinstalled | 6x Relays output, 2x Digital input |
| radino DinRail Adapter | |
1TE | suitable for
all radino modules |
DinRail Adapter to connect any radino Modules |
| DIN Rail BUS Extender |  |
1TE | Connect separate rails | |
| DIN Rail BUS Auskoppler |  |
1TE | External connectors for 24V supply and RS485 |
Microcontroller Modules
Other Products
