Difference between revisions of "NAND-Connection ICnova SAM9G45"
From InCircuit
(Adding diversity between OEM and SO-Dimm) |
|||
Line 1: | Line 1: | ||
− | The NAND-Flash used on ICnova SAM9G45 OEM and ICnova SAM9G45 SO-DIMM is the same and connected nearly equally. The following parameters are met for this device: | + | The NAND-Flash used on [http://shop.in-circuit.de/products/ICnova-CPU-Module/ARM-Module/6/ICnova-SAM9G45-OEM ICnova SAM9G45 OEM] and [http://shop.in-circuit.de/products/ICnova-CPU-Module/ARM-Module/2/ICnova-SAM9G45-SODIMM ICnova SAM9G45 SO-DIMM] is the same and connected nearly equally. The following parameters are met for this device: |
{| class="wikitable" | {| class="wikitable" |
Revision as of 11:43, 17 December 2012
The NAND-Flash used on ICnova SAM9G45 OEM and ICnova SAM9G45 SO-DIMM is the same and connected nearly equally. The following parameters are met for this device:
Typ | NAND02GW3B2 |
VCC | 3.3V |
Buswidth | 8bit |
Startaddress | 0x40000000 |
ALE-AddressBit | 21 (0x40200000) |
CLE-AddressBit | 22 (0x40400000) |
CE on GPIO | PortC Pin8 on OEM, Pin 14 on SO-DIMM |
RnB on GPIO | PortC Pin11 on OEM, Pin 8 on SO-DIMM |
To acccess the NAND-Device using a custom bootloader, the AT91SAM9G45 EBI Interface must be configured accordingly and the EBI_CS3A Bit in the EBICSA Register must be set to activate NAND-Logic.