Open Source Blinds Controller

From InCircuit
Revision as of 12:55, 9 February 2015 by Fklause (Talk | contribs)

Jump to: navigation, search

radino-WiFi DIY-Blindscontroller.jpg radinoDIY BlindsController oragne-offen.jpg
The open source Blinds Controller is an exemplary smart home Application using our radino Modules.
With this device and one of our radino Modules you can build up a radio interface for your electrical blind, garage door, window opener,...
Due to the fact that out radino Modules are Arduino compatible, you are able to develope your own control algorithm in the Arduino IDE.
The device fits inside a standard 60mm flush-mounted socket.

Features:

  • integriated universal AC/DC mains adapter:
    • input:
      • 85 — 260V AC
      • 25 — 260V DC
    • output:
      • 10.7V not galvanically isolated (ribble voltage: max. 100mV, other Voltages above 5V possible)
      • 1,2W constant load
      • short-circuit-proof
  • suitable for all radino Modules
  • 2x relais (1x on/off switch & 1x toggle switch in series)
  • switching capacity:
    • max. 250V/6A AC
    • max. 30V/6A DC
  • 2x inputs
  • RGB LED
  • temperature sensor
  • Arduino kompatible

Software

The core of radino is an Arduino Micro, so the programming is as easy as programming an Arduino Micro.
Visit radino software for more information about the Arduino IDE.

Downloads

File:Blinds Control Deliverable.zip

Personal tools