Programmer
ICprog OpenOCD
Open Source Adapter:
- USB JTAG Adapter for OpenOCD
- Standard 2x5pin ARM JTAG pinheader
- Additional Pinheader for TTL-UART
- Compatible with all our ARM-based Boards (ICnova SAM9G45 OEM, ICnova i.MX353 OEM)
Downloads:
Schematic Programmer
Links:
JTAG via OpenOCD
The USB-A UART Bridge CP2104 can be ordered at our Shop
ICprog-AVR2.0 / KANDA
The ICprog-AVR2.0 / KANDA is the smallest available USB-Programmer for Atmels AVR microcontroller.
Version 2.0 is programming twice as fast as ordinary programmers.
ICprog-AVR2.0 / KANDA knows about the Page Programming Mode and is compatible to AVR910.
For controlling purposes there are LEDs on this programmer. We recommend the AVRDUDE for programming.
The ICprog-AVR2.0-KANDA has a 10 pole programming interface unlike to the 6-pole connector of ICprog-AVR2.0.
The Programmer is equipped with a bootloader, that is able to flash firmware-updates.
Software:
Downloads:
How to install drivers for CP2102 (german)
Datasheet ICprog-AVR2.0 KANDA (en)
Datasheet ICprog-AVR2.0 KANDA (de)
Wiggler
Standard Wiggler low cost JTAG interface for Parallelport.
Downloads: