UART Settings

From InCircuit
Revision as of 15:53, 19 December 2013 by Raik (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

To communicate with a controller, the ICradio use a usual Uart-Interface with the following parameters:

Baudrate 38400
Databits 8
Stopbits 1
Parity None
Flowcontrol Software (XON/XOFF)

Please make sure not to connect the ICradio's RX/TX-Pins directly to the PC's serial port, as the ICradio's pin have a voltage-level of 3.3V to 5V, the PC's pins a level of 12V. To use these devices on the PC you need either an RS232 Levelshifter or an USB-UART-Bridge.

Retrieved from "https://wiki.in-circuit.de/index.php5?title=UART_Settings&oldid=1844"
Personal tools