Difference between revisions of "UART Settings"
From InCircuit
(Created page with 'To communicate with a controller, the ICradio use a usual Uart-Interface with the following parameters: {| class:wikitable |- | ''Baudrate'' || 38400 |- | ''Databits'' || 8 |- |…') |
Revision as of 17:03, 1 June 2011
To communicate with a controller, the ICradio use a usual Uart-Interface with the following parameters:
| Baudrate | 38400 |
| Databits | 8 |
| Stopbits | 1 |
| Parity | None |
| Flowcontrol | Software (XON/XOFF) |
Please make sure not to connect the ICradio's RX/TX-Pins directly to the PC's serial port, as the ICradio's pin have a voltage-level of 3.3V to 5V, the PC's pins a level of 12V. To use these devices on the PC you need either an RS232 Levelshifter or an USB-UART-Bridge.
