radino software

Arduino IDE

• Visit http://www.arduino.cc/en/Main/Software and download the latest version of Arduino IDE
• Install Arduino IDE on your computer
• Now start Arduino IDE. If installed properly, a windows like this should open:

Arduino IDE

radino support files

• Visit http://www.in-circuit.de/ or http://www.radino.cc/ to download the latest In-Circuit Arduino SW Support Package
• Unzip the downloaded file, after it you now have two folders (hardware and libraries) and a file (README.txt):

• Now copy both folders into your main Arduino-Sketch folder.
  This folder was specially defined during installation or has one of the following default paths (english and german):

My Documents\Arduino
C:\Documents and Settings\yourUserName\My Documents\Arduino
C:\Users\yourUserName\Documents\Arduino

Eigene Dateien\Arduino
C:\Dokumente und Einstellungen\ihrBenutzerName\Eigene Dateien\Arduino
C:\Benutzer\ihrBenutzerName\Eigene Dateien\Arduino

radino connection

• The Figure shows minimal USB setup:

driver and serial port

• When first using radino, a driver installation is required.
  If asked for the driver, just point the driver installer tool to the radino driver folder:

• Your computer now assigns a serial port.You can see a new com port in windows device manager:

sketch upload

• Open Arduino IDE and select one of the variuos available example sketches for your radino:

• Now choose your corresponding radino to which you want to upload the sketch: