Zum Hauptinhalt springen

radino RF69

This product is End of Life

This product is End of Life

Hardware​

radino RF69, 433/868MHz
radino RF69, 433/868MHz
radino RF69, 433/868MHz

The In-Circuit radino RF69 combines an Arduino Micro with RF69 from HOPE Microelectronics
in a small EMC-compliant enclosure. It is part of our family of pin-to-pin compatible radino Modules.
Two modules are available for 433MHz and 868 MHz.

It's part of the radino-series, which provides full-Arduino-compatible wireless communication devices
in a small form factor, all pin-compatible to each other.

Features:

  • Arduino-compatible (Arduino Micro / Leonardo)
  • HOPE Microelectronics RF69 (Datasheet HOPE Microelectronics RF69)
  • +20dBm- 100mW Power Output Capability
  • Programmable Pout: -18dBm to +20dBm in 1dB steps
  • High Sensitivity: down to -120dBm at 1.2kbps
  • High Selectivity: 16-tap FIR Channel Filter
  • FSK Bitrates up to 300kbps
  • 115dB+ Dynamic Range RSSI
  • Wide range of possible protocols
  • Wide software support by community
  • Available versions for 433MHz and 868MHz
  • 15 GPIOs (5 PWM, 5 Analog IN)
  • I²C, SPI, UART
  • USB (HID Keyboard & Mouse, virtual UART)
  • High-Performance, Low-Power Microcontroller ATmega32U4
  • Arduino Demo Applications available in our Library!

Suitable application development boards​

BoardPicturesDescription
radino Leonardoleonardo 45.jpg
Leonardo moduleinlegen.jpg		Carrier board suitable for all radino modules. Includes Arduino connector for easy mounting of Arduino shields. Voltage regulator and Level-Shifters are also included.
radino Spider RP-SMAradino-spider-rpsma top.jpgBreadboard adapter for all radino modules
radino USB Stickradino-usb-stick 45.jpg
radino-usb-stick enclosure.jpg radino-usb-stick top.jpg radino-usb-stick bot.jpg		USB Stick for all radino modules. Available with integrated Chip-antennas and as a version with RP-SMA-connector.
radino UART-Bridgeradino UART 45 640.jpg
radino UART top 640.jpg radino UART bot 640.jpg		UART bridge with power supply and level shifters for all radino modules
radino RS485/RS232-Bridge IP65RS485+RS232 45.JPG
RS485+RS232 Anschluss.JPG		radino RS485-Bridge IP65 outdoor radio adapter for Modbus, Art-Net etc. Includes RS485 driver, RS232 driver, IP65 enclosure.
XBee-PRO Shieldxbee cc1101 45 1000.JPG
xbee bot 45 1000.JPG xbee RPSMA 1000.JPG		XBee Pro adapter for all radino modules
radino DinRail Adapterradino-dinrail top 45 housing.jpgDinRail Adapter connects our RS485 DinRail Bus System to radino modules

Software​

Applications:

  • Ultra low power wireless applications operating in the 433/868/915 MHz ISM/SRD bands
  • Wireless alarm and security systems
  • Industrial monitoring and control
  • Wireless sensor networks
  • AMR – Automatic Meter Reading
  • Home and building automation
  • Wireless MBUS
  • Data logging
  • Any Arduino project

Working with Arduino IDE

The core of radino is an Arduino Micro, so the programming is as easy as programming an Arduino Micro.
For the Arduino IDE Boards Manager the following URL is required:

http://library.radino.cc/Arduino\_1\_8/package\_radino\_radino32\_index.json

Visit radino/radino32 software for more information about the Arduino IDE and installation.

For detailed information about our library for the Arduino IDE look at the radino Library documentation.

Common problems regarding radino modules and the Arduino system: Common problems

The Arduino IDE requires the following includes for using the radino RF69.

#include <SPI.h> #include <RFM69.h> #include <IC_RF69.h> #include <IC_RF69_Bridge.h>

If you don't want to use the Arduino IDE, you can flash an existing .hex file with avrdude. For more information see: Upload binary on radino

Downloads​

Datasheet radino RF69
EU conformity radino RF69, 433 MHz
EU conformity radino RF69, 868 MHz
RF69-Datasheet
Eagle library for radino/radino32
Driver for radino