3Dino
From InCircuit
Contents |
Hardware
The 3Dino is a low budget stand alone Delta 3D-Printer. The 3Dino comes with the RepRap Full Graphic Smart Controller with SD-Card slot to execute G-Code Files directly from SD-Card. So there is no PC needed to print Models. In standard line-up it offers a 214x214mm PCB heat bed with a built volume of 200x200x250mm, 0.5mm Nozzle for 3mm Filament, Auto Bed Leveling function and printing speed up to 2500mm/min. The maximum possible build volume is a cylinder with cross-section-dimension of 360mm and a height of 250mm.
Features:
- 100% Arduino Mega compatible controller board ICstep01
- RepRap's Full Graphic Smart Controller with SD-Card Slot installed ( http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller)
- 4x A4988 stepper drivers
- 3x Nema17 step motor (axis)
- 1x geared Nema17 step motor (extruder)
- Mini ATX housing for ICstep01 with integrated 400W power supply
- Compact bowden extruder for 3mm filament
- Print head with 0.5mm nozzle
- Auto bed leveling function integrated
- 12/24V PCB heat bed MK2B
Dimensions:
- Edge length: ~620mm (triangular base)
- Height of skeletal structure: 950mm
- Height with superstructure: 1200mm
- Dimensions heat bed: 214x214mm
- Print volume with heat bed: 200x200x250mm (bed can be remover/replaced for bigger build volume)
- Max. build volume: circular, 360mm cross-section-dimension, 270mm height
- Resolution: 200um
- Printing speed: tested up to 2500mm/min
- Weight: ~20kg
Software
- Calibrated Marlin firmware installed
- We recommend slicing and printing software: Simplify 3D (https://www.simplify3d.com)
- We offer Simplify 3D print profiles for selected filaments
Exaples
Here are some example prints we printed with our 3Dino Printer