ICflyMotorbox 912
From InCircuit
Contents |
General Information
The ICflyMotorbox 912 reads engine data from the Rotax 912 and makes them available via ICflyBus for ICflyAHRSII.
Features
- ICflyBus: wired connection between ICfly devices (ICflyAHRSII, ICflyDisplay, ICflyMotorbox 912 and more)
- Power supply for other ICfly devices over ICflyBus
Connections
- 2x ICflyBus
- CAN bus (for head-up display)
- 2x thermocouple (EGT)
- from engine
- RPM
- MAP
- FLAPS
- Oil pressure and temperature
- Fuel pressure
- FUEL_R, FUEL_L, FUEL_F
- 2x CHT
- AirBoxTemp
- OAT
Firmwareupdate
The firmware of the ICflyMotorbox can be updated via SD-Card.
Just extract the firmwareupdate to a FAT-formatted uSD-Card, insert it into the ICflyMotorbox and apply power to the ICflyMotorbox. Then the firmware will be updated automatically.
Please refer to the table below for all available firmware-updates.
Firmwareversion | Description | Downloadlink |
---|---|---|
0.11 | Initial Firmware Release |
Download |
Configuration-Tool
The ICflyMotorbox can be configured using a Windows-Tool.
An ICflyAHRSII or ICflyConnect is required to provide WLAN-connectivity to the ICflyMotorbox.
- Connect your Windows-PC via WLAN to your ICflyAHRSII or ICflyConnect
- Open the website of your ICflyAHRSII or ICflyConnect to configure the correct baudrate settings (http://192.168.42.1)
- Start the ICflyMotorbox Configuration-Tool
- Connect to your ICflyMotorbox
Functions:
- Import / Export ICflyMotorbox configuration
- Load / Store single channel configuration
- Load / Store single channel LUT (Look-Up-Table) to configure the channels
Recommended operation system:
- Windows 10
Please refer to the table below for all available versions of the ICflyMotorbox Configuration-Tool.
Version | Description | Downloadlink |
---|---|---|
1.0.11 | Initial Release |
Download |