Difference between revisions of "3Dino"

Revision as of 16:24, 20 March 2015

Hardware

The 3Dino is a low budget stand alone Delta 3D-Printer. The 3Dino comes with the RepRap Full Graphic Smart Controller with SD-Card slot to execute G-Code Files directly from SD-Card. So there is no PC needed to print Models. In standard line-up it offers a 214x214mm PCB heat bed with a built volume of 200x200x250mm, 0.5mm Nozzle for 3mm Filament, Auto Bed Leveling function and printing speed up to 2500mm/min. The maximum possible build volume is a cylinder with cross-section-dimension of 360mm and a height of 250mm.

Features:

• 100% Arduino Mega compatible controller board ICstep01
• RepRap's Full Graphic Smart Controller with SD-Card Slot installed ( http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller)
• 4x A4988 stepper drivers
• 3x Nema17 step motor (axis)
• 1x geared Nema17 step motor (extruder)
• Mini ATX housing for ICstep01 with integrated 400W power supply
• Compact bowden extruder for 3mm filament
• Print head with 0.5mm nozzle
• Auto bed leveling function integrated
• 12/24V PCB heat bed MK2B

Dimensions:

• Edge length: ~620mm (triangular base)
• Height of skeletal structure: 950mm
• Height with superstructure: 1200mm
• Dimensions heat bed: 214x214mm
• Print volume with heat bed: 200x200x250mm (bed can be remover/replaced for bigger build volume)
• Max. build volume: circular, 360mm cross-section-dimension, 270mm height
• Resolution: 200um
• Printing speed: tested up to 2500mm/min
• Weight: ~20kg

Software

• Calibrated Marlin firmware installed
• We recommend Simplify 3D as slicing and printing software (https://www.simplify3d.com)
• We offer Simplify 3D print profiles for selected filaments

Examples

Here are some example prints we printed with our 3Dino Printer

Downloads

Datasheet 3Dino
Media:Simplify 3D print profiles PLA 3mm black Firstcom.zip