3Dino

Hardware

The 3Dino is a low budget stand alone Delta 3D-Printer. The 3Dino comes with the RepRap Full Graphic Smart Controller with SD-Card slot to execute G-Code Files directly from SD-Card. So there is no PC needed to print Models. In standard line-up it offers a 214x214mm PCB heat bed with a built volume of 200x200x250mm, 0.5mm Nozzle for 3mm Filament, Auto Bed Leveling function and printing speed up to 2500mm/min. The maximum possible build volume is a cylinder with cross-section-dimension of 360mm and a height of 250mm.

Features:

100% Arduino Mega compatible controller board ICstep01
RepRap's Full Graphic Smart Controller with SD-Card Slot installed ( http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller)
4x A4988 stepper drivers
3x Nema17 step motor (axis)
1x geared Nema17 step motor (extruder)
Mini ATX housing for ICstep01 with integrated 400W power supply
Compact bowden extruder for 3mm filament
Print head with 0.5mm nozzle
Auto bed leveling function integrated
12/24V PCB heat bed MK2B

Dimensions:

Edge length: ~620mm (triangular base)
Height of skeletal structure: 950mm
Height with superstructure: 1200mm
Dimensions heat bed: 214x214mm
Print volume with heat bed: 200x200x250mm (bed can be remover/replaced for bigger build volume)
Max. build volume: circular, 360mm cross-section-dimension, 270mm height
Resolution: 200um
Printing speed: tested up to 2500mm/min
Weight: ~20kg

Software

Calibrated Marlin firmware installed
We recommend Simplify 3D as slicing and printing software (https://www.simplify3d.com)
We offer Simplify 3D print profiles for selected filaments