Difference between revisions of "ICnova SAM9G45 SODIMM"

From InCircuit
Jump to: navigation, search
(→‎Downloads)
 
(19 intermediate revisions by 4 users not shown)
Line 1: Line 1:
−
{{Under construction}}
 
−
 
−
 
−
 
 
== Hardware ==
 
== Hardware ==
  
 
'''ICnova SAM9G45 SODIMM''' - high performance ARM9 SODIMM-200 module
 
'''ICnova SAM9G45 SODIMM''' - high performance ARM9 SODIMM-200 module
  
−
[[File:icnova_sam9g45_sodimm.jpg |220px | thumb | right | ICnova SAM9G45 SODIMM]]
+
[[File:Icnova_sam9g45_sodimm.jpg |320px | thumb | right | ICnova SAM9G45 SODIMM |link=http://shop.in-circuit.de/product_info.php?cPath=24_34&products_id=131]]
  
  
−
The device [http://shop.in-circuit.de/products/ICnova-CPU-Module/ARM-Module/2/ICnova-SAM9G45-SODIMM ICnova SAM9G45 SODIMM] is equipped with an Atmel AT91SAM9G45 MCU or its sister MCU Atmel AT91SAM9M10.
+
The device {{PAGENAME}} is equipped with an Atmel AT91SAM9G45 MCU or its sister MCU Atmel AT91SAM9M10.
 
It operates with an ARM926EJS core at 400MHz CPU clock.
 
It operates with an ARM926EJS core at 400MHz CPU clock.
  
Line 19: Line 15:
 
*128MB DDR2-RAM
 
*128MB DDR2-RAM
 
*8MB NOR-Flash
 
*8MB NOR-Flash
−
*256MB NAND Flash
+
*256MB NAND-Flash
 
*integrated 10/100 MBit Ethernet PHY
 
*integrated 10/100 MBit Ethernet PHY
 
*voltage regulators for 3.3V, 2.5V and 1.8V core voltage
 
*voltage regulators for 3.3V, 2.5V and 1.8V core voltage
Line 25: Line 21:
 
*easy to use SODIMM-200 module (2.5V-Version)
 
*easy to use SODIMM-200 module (2.5V-Version)
 
*Commercial temperature range from -10°C to +70°C
 
*Commercial temperature range from -10°C to +70°C
−
*Industrial tempearture range from -40°C to +85°C also available  
+
*Industrial temperature range from -40°C to +85°C also available
  
 +
== Suitable application development boards ==
 +
[http://shop.in-circuit.de/ In-Circuit] offers a wide range of [[Application Development Boards]] that can be used to develop your products and solutions while reducing your development time.
  
 +
These evaluation boards help you to evaluate the features and performance of selected products and system solutions. Our evaluation boards demonstrate optimized and tested solutions for your application design. These boards are designed mainly for your evaluation, design and testing purposes.
  
−
== Compatible evaluation boards ==
+
Basically all our ADBs feature: Ethernet, USB-Host, USB_Device, SDC<br/>
 +
Exceptions to this are listed in the Notes column of the following table.
  
−
[http://shop.in-circuit.de/ In-Circuit] offers a wide range of evaluation boards that can be used to develop your products and solutions while reducing your development time.
+
The table below shows the suitable '''A'''pplication '''D'''evelopment '''B'''oards ('''ADB''') for the {{PAGENAME}}.
−
These evaluation boards help you to evaluate the features and performance of selected products and system solutions.
+
−
Our evaluation boards demonstrate optimized and tested solutions for your application design. These boards are designed mainly for your evaluation, design and testing purposes.
+
  
−
The table below shows the suitable '''A'''pplication '''D'''evelopment '''B'''oards ('''ADB''') for the ICnova SAM9G45 SODIMM .
+
{| class="wikitable"
 +
|-
 +
!ADB
 +
!Picture
 +
!Supply voltage
 +
!Main features
 +
!Notes
  
  
−
{| class="wikitable" style="text-align:left; "
 
−
|+ <!--suitable Application Development Boards-->
 
 
|-
 
|-
−
! Evaluation board
+
|[[ICnova ADB4004]]
−
!Main features
+
|[[File:ICnova_ADB4004.jpeg|150px|left|link=ICnova ADB4004]]
−
|-
+
|12-24V DC
−
! [[ADB4000]]
+
|TFT-Touchscreen connector, RS485, RS422, RS232, I2C, RTC, Buzzer, GPIO pin headers
−
| Socket for all ICnova SODIMM Modules; ATXmega 128A1 µController as IO processor; 1x 10/100 MBit Ethernet; 1x 480MBit USB Host; 1x 480MBit USB Device; 3xRS485, 2xµSD card reader; 2 sockets for ICradio OEM modules
+
for ICnova SAM9G45 SODIMM
 +
|
 +
 
 
|-
 
|-
 
|}
 
|}
−
 
  
 
== Software ==
 
== Software ==
 +
All Modules provided by In-Circuit usally have a [[:Category:Buildroot|Buildroot]] based system preinstalled, so they can be used out of the box.<br />Login as "root" for which no password is set.
  
−
All Modules provided by In-Circuit usally have a [[:Category:Buildroot|Buildroot]] based system preinstalled, so they can be used out of the box. For some configuration a suitable [[:Category:Android|Android]]-Image is provided, too.
+
If you are new to kernel building please refer to [[First Steps with Buildroot]].
  
−
The '''[http://www.ic42.de/Linux-Images/icnova_20110104.iso Support-CD]''' contains all sources, incl. Linux 2.6.28, which are needed to build a toolchain and a working filesystem for the {{PAGENAME}}.
+
The board support package contains all sources required to build the linux image for the [[{{PAGENAME}}]] on the main ADB.<br/>
 +
The most recent version is listed at the bottom of this page. Other versions can be found on the [[Downloads]] page.
  
−
[[Memorymapping of ICnova SAM9G45 SODIMM]]
+
Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none is found.
 +
 
 +
On the {{PAGENAME}} the bootloader [[u-boot]] is preinstalled on the on-board flash.
  
  
 
== Downloads ==
 
== Downloads ==
  
−
[[Media: 305000044B_ICnova SAM9G45 SODIMM.pdf |Datasheet {{PAGENAME}}]]
+
[http://www.ic42.de/Linux-Images/20140210_buildroot.tar.bz2 Most recent board support package]
 +
 
 +
[[Media: 305000044C_ICnova_SAM9G45_SODIMM.pdf |Datasheet {{PAGENAME}}]]
  
 
[[Media: SO-DIMM_footprint.pdf |Footprint {{PAGENAME}}]]
 
[[Media: SO-DIMM_footprint.pdf |Footprint {{PAGENAME}}]]
Line 67: Line 76:
 
[[Media: In-Circuit_Flyer11-2010.pdf |Flyer ADB4000 + SAM9G45 SODIMM + Android]]
 
[[Media: In-Circuit_Flyer11-2010.pdf |Flyer ADB4000 + SAM9G45 SODIMM + Android]]
  
−
[[Media: Pinning_Sodimm.xls  |Pinning SODIMM]]
+
[[Media: Pinning_Sodimm.xls  |Pinning ICnova SODIMM]]
 +
 
 +
[[Media: 641000003A_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-deutsch.pdf]]
 +
 
 +
[[Media: 641000003A_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-englisch.pdf]]
  
 +
[[Media: 641000003B_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-deutsch.pdf]]
  
 +
[[Media: 641000003B_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-englisch.pdf]]
  
 +
[[Media: 641000003C_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-deutsch.pdf]]
  
−
[[Category:ICnova CPU-Modules]]
+
[[Media: 641000003C_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-englisch.pdf]]

Latest revision as of 12:40, 28 July 2020

Contents

[edit] Hardware

ICnova SAM9G45 SODIMM - high performance ARM9 SODIMM-200 module

ICnova SAM9G45 SODIMM


The device ICnova SAM9G45 SODIMM is equipped with an Atmel AT91SAM9G45 MCU or its sister MCU Atmel AT91SAM9M10. It operates with an ARM926EJS core at 400MHz CPU clock.


Features:

  • Atmel ARM9 AT91SAM9G45B processor with up to 400 MHz CPU clock
  • 128MB DDR2-RAM
  • 8MB NOR-Flash
  • 256MB NAND-Flash
  • integrated 10/100 MBit Ethernet PHY
  • voltage regulators for 3.3V, 2.5V and 1.8V core voltage
  • all peripherals are accessible on connectors
  • easy to use SODIMM-200 module (2.5V-Version)
  • Commercial temperature range from -10°C to +70°C
  • Industrial temperature range from -40°C to +85°C also available

[edit] Suitable application development boards

In-Circuit offers a wide range of Application Development Boards that can be used to develop your products and solutions while reducing your development time.

These evaluation boards help you to evaluate the features and performance of selected products and system solutions. Our evaluation boards demonstrate optimized and tested solutions for your application design. These boards are designed mainly for your evaluation, design and testing purposes.

Basically all our ADBs feature: Ethernet, USB-Host, USB_Device, SDC
Exceptions to this are listed in the Notes column of the following table.

The table below shows the suitable Application Development Boards (ADB) for the ICnova SAM9G45 SODIMM.

ADB Picture Supply voltage Main features Notes


ICnova ADB4004
ICnova ADB4004.jpeg
 12-24V DC TFT-Touchscreen connector, RS485, RS422, RS232, I2C, RTC, Buzzer, GPIO pin headers

for ICnova SAM9G45 SODIMM

[edit] Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box.
Login as "root" for which no password is set.

If you are new to kernel building please refer to First Steps with Buildroot.

The board support package contains all sources required to build the linux image for the ICnova SAM9G45 SODIMM on the main ADB.
The most recent version is listed at the bottom of this page. Other versions can be found on the Downloads page.

Generally the bootloaders on our modules are configured to loook for a bootable linux image on the SD-Card and only boot from flash if none is found.

On the ICnova SAM9G45 SODIMM the bootloader u-boot is preinstalled on the on-board flash.


[edit] Downloads

Most recent board support package

Datasheet ICnova SAM9G45 SODIMM

Footprint ICnova SAM9G45 SODIMM

Flyer ADB4000 + SAM9G45 SODIMM + Android

Pinning ICnova SODIMM

Media: 641000003A_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-deutsch.pdf

Media: 641000003A_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-englisch.pdf

Media: 641000003B_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-deutsch.pdf

Media: 641000003B_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-englisch.pdf

Media: 641000003C_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-deutsch.pdf

Media: 641000003C_PCN_901.227C_EBG_ICnova-SAM9G45-SODIMM_RevC-englisch.pdf

Retrieved from "https://wiki.in-circuit.de/index.php5?title=ICnova_SAM9G45_SODIMM&oldid=5758"
Personal tools