Difference between revisions of "ICnova ADB1002"

From InCircuit
Jump to: navigation, search
Line 4: Line 4:
 
== Hardware ==
 
== Hardware ==
  
The {{PAGENAME}} is an evaluation board which is ideal to develop network applications on the [[ICnova AP7000 OEM]] and [[ICnova AP7000 OEMplus]].
+
The {{PAGENAME}} is an evaluation board which is ideal to develop network applications. It works with all ICnova OEM Modules.
  
[[File:ICnova ADB1002.jpg |220px | thumb | right | {{PAGENAME}}]]
+
[[File:ADB1002.jpg |220px | thumb | right | {{PAGENAME}}]]
  
 
It is ideal for developing:
 
It is ideal for developing:
*Firewalls
+
*Radio sniffer applications
*Router
+
*Home automation
*Network Attached Storage (NAS)
+
*embedded Linux Board with DVI-Interface
 
+
*Wireless Gateway
The USB 2.0 high speed host port on the ICnova ADB1001 in association with the [[ICnova AP7000 OEMplus]] maximizes the benefit of the board.
+
  
  
 
'''The {{PAGENAME}} has the following features:'''
 
'''The {{PAGENAME}} has the following features:'''
  
*2x 10/100 Base-T-Ethernet-Port
+
 
*1 High-Speed-USB 2.0 Host ports (only with an ICnova OEMplus module)
+
*1x Socket for ICnova OEM Modules
*1x USB-Device Port
+
*1x Socket for ICradio OEM Modules
*1x µSD card holder with MMI interface
+
*1x DVI–Interface for direct monitor support
 +
*1x 10/100MBit Ethernet (MII)
 +
*1x USB 2.0 High Speed Host (480 MBit)
 +
*1x USB 2.0 High Speed Device (480 MBit)
 +
*1x UART on Pinheader
 +
*1x JTAG for ICnova OEM
 +
*1x JTAG for Radio OEM
 +
*2x µSD card holder with MMI and SPI interface
 
*1x Real-Time-Clock buffered with Li-Ion battery
 
*1x Real-Time-Clock buffered with Li-Ion battery
*1x JTAG-interface (compatible with JTAGICE-mkII)
+
*1x I²C (TWI)on Pinheader
*1x User-LED, 1x Power LED
+
*Dimensions: 100mm x 120mm  
*100mm x 120mm
+
 
*Power Supply from USB-Device Port or 5VDC Supply over Power Jack
 
*Power Supply from USB-Device Port or 5VDC Supply over Power Jack
*Power consumption about 1.5W
+
*Power consumption about 1.5W  
  
  

Revision as of 12:39, 29 April 2013

Template:Under construction


Hardware

The ICnova ADB1002 is an evaluation board which is ideal to develop network applications. It works with all ICnova OEM Modules.

ICnova ADB1002

It is ideal for developing:

  • Radio sniffer applications
  • Home automation
  • embedded Linux Board with DVI-Interface
  • Wireless Gateway


The ICnova ADB1002 has the following features:


  • 1x Socket for ICnova OEM Modules
  • 1x Socket for ICradio OEM Modules
  • 1x DVI–Interface for direct monitor support
  • 1x 10/100MBit Ethernet (MII)
  • 1x USB 2.0 High Speed Host (480 MBit)
  • 1x USB 2.0 High Speed Device (480 MBit)
  • 1x UART on Pinheader
  • 1x JTAG for ICnova OEM
  • 1x JTAG for Radio OEM
  • 2x µSD card holder with MMI and SPI interface
  • 1x Real-Time-Clock buffered with Li-Ion battery
  • 1x I²C (TWI)on Pinheader
  • Dimensions: 100mm x 120mm
  • Power Supply from USB-Device Port or 5VDC Supply over Power Jack
  • Power consumption about 1.5W


The ICnova ADB1002 and appropriate ICnova CPU-Modules can be ordered at our Shop.


Software

All Modules provided by In-Circuit usally have a Buildroot based system preinstalled, so they can be used out of the box. For some configuration a suitable Android-Image is provided, too.


Downloads

Datasheet ICnova ADB1002

Schematic ICnova ADB1002

Personal tools